TBSDTV Community Forum

Hi!

I have this card acquired very recently directly from TBS, and Im installing it in Ubuntu 14.04.2 (kernel 3.16).

Everything seems ok in the system, but when I try to tune to some frequency, it doesnt work

lspci -vvv

Code: Select All Code

04:00.0 Multimedia controller: Device 544d:6178
        Subsystem: Device 6905:0001
        Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
        Interrupt: pin A routed to IRQ 22
        Region 0: Memory at df100000 (32-bit, non-prefetchable) [size=256K]
        Capabilities: [50] Power Management version 3
                Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
                Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
        Capabilities: [70] MSI: Enable- Count=1/1 Maskable- 64bit+
                Address: 0000000000000000  Data: 0000
        Capabilities: [90] Express (v1) Endpoint, MSI 00
                DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
                        ExtTag- AttnBtn- AttnInd- PwrInd- RBE+ FLReset-
                DevCtl: Report errors: Correctable+ Non-Fatal+ Fatal+ Unsupported-
                        RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
                        MaxPayload 128 bytes, MaxReadReq 512 bytes
                DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
                LnkCap: Port #0, Speed 2.5GT/s, Width x1, ASPM L0s, Exit Latency L0s unlimited, L1 <1us
                        ClockPM- Surprise- LLActRep- BwNot-
                LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- CommClk+
                        ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
                LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
        Capabilities: [100 v1] Device Serial Number 00-00-00-00-00-00-00-00
        Kernel driver in use: TBS PCIE

dmesg:

Code: Select All Code

[   10.068503] TBS PCIE 0000:04:00.0: enabling device (0000 -> 0002)
[   10.068650] TBS PCIE Detected TBS6905 Board Rev 1
[   10.073088] DVB: registering new adapter (TBS PCIE DVB Adapter)
[   10.326096] TurboSight TBS 6908 Frontend Attaching...
[   11.414293] TurboSight TBS6908 DVB-S2 card adapter0 MAC=00:22:ab:69:08:01
[   11.414300] DVB: registering adapter 0 frontend 0 (TurboSight TBS 6908 DVBS/S2 frontend)...
[   11.414509] DVB: registering new adapter (TBS PCIE DVB Adapter)
[   11.415090] TurboSight TBS 6908 Frontend Attaching...
[   11.417797] TurboSight TBS6908 DVB-S2 card adapter1 MAC=00:22:ab:69:08:02
[   11.417802] DVB: registering adapter 1 frontend 0 (TurboSight TBS 6908 DVBS/S2 frontend)...
[   11.417907] DVB: registering new adapter (TBS PCIE DVB Adapter)
[   11.577605] TurboSight TBS 6908 Frontend Attaching...
[   12.597336] TurboSight TBS6908 DVB-S2 card adapter2 MAC=00:22:ab:69:08:03
[   12.597343] DVB: registering adapter 2 frontend 0 (TurboSight TBS 6908 DVBS/S2 frontend)...
[   12.597566] DVB: registering new adapter (TBS PCIE DVB Adapter)
[   12.598125] TurboSight TBS 6908 Frontend Attaching...
[   12.600912] TurboSight TBS6908 DVB-S2 card adapter3 MAC=00:22:ab:69:08:04
[   12.600916] DVB: registering adapter 3 frontend 0 (TurboSight TBS 6908 DVBS/S2 frontend)...

scan-s2 on astra 19.2E:

Code: Select All Code

Network Name 'ASTRA 1'
dumping lists (7 services)
Cherie 25;Arqiva:11778:vC34M2O35S0:S19.2E:27500:1801:1804;1804:0:0:28531:1:1068:0
Cherie 25;Arqiva:11778:vC34M2O35S0:S19.2E:27500:1801:1804;1804:0:0:28550:1:1068:0
Cherie 25;Arqiva:11778:vC34M2O35S0:S19.2E:27500:1801:1804;1804:0:0:28551:1:1068:0
ZDF HD;ZDFvision:11361:hC23M2O35S1:S19.2E:22000:6110:6120=deu,6121=mis,6123=mul;6122=deu:6130:0:11110:1:1011:0
zdf_neo HD;ZDFvision:11361:hC23M2O35S1:S19.2E:22000:6310:6320=deu,6321=mis,6323=mul;6322=deu:6330:0:11130:1:1011:0
zdf.kultur HD;ZDFvision:11361:hC23M2O35S1:S19.2E:22000:6410:6420=deu,6421=mis,6423=mul;6422=deu:6430:0:11140:1:1011:0
Done.


When I try to tune on those scan-s2 frequencys, I get 100% SNR.

The driver version im using is tbs-linux-drivers_v150411.zip

Does anyone has any idea of what's wrong with this? I have never had this problem before.

Hi,
please update the driver.We have released the latest driver.

Best regards

Hello found a solution, I also have the same problem and have asked several times to support and have not answered anything. I also tell them that I have the latest version of drivers disponibles.Linux Driver v150525

@marcosab

please, provide exact way how you're trying to scan. most likely there is some mistake there? are you sure there is signal to the adapter you're trying to use on your scan?

Hello,

i have the same issue with this model, we update the driver but nothing, not scan any frequency, some one can help us with info to fix this issue ? thanks

Hi wannabe

Which application you are using ? and what about your config, you can send your detail information to our support#tbsdtv.com
we will reply you ASAP.

Thanks

kind Regard

steven