TBS5530 Full TS Capture
Posted: Thu Apr 20, 2023 9:44 pm
Hi,
First of all, I couldn't find a dedicated section for TBS5530. Can you guide me if it exists? So that I can open this topic there.
I just bought a TBS5530 and using it with DVBS/S2 signals in Turkey. Device is connected to a Multiswitch (which supports both Diseqc1.0 and Diseqc1.1 spec) like this:
And I can also perfectly can use the device under Ubuntu 22.04 with Kaffeine APP:
I can scan & watch channels with Kaffeine.
However, I would like to use this device to capture Full Transport Stream, I mean whole TS file coming from a Transponder.
To achieve this, I used mumudvb as follows:
So why it does not tune with MumuDVB ?
Can you also suggest to use another app that can work with Ubuntu, that allow me to capture Full TS for a given TP ?
First of all, I couldn't find a dedicated section for TBS5530. Can you guide me if it exists? So that I can open this topic there.
I just bought a TBS5530 and using it with DVBS/S2 signals in Turkey. Device is connected to a Multiswitch (which supports both Diseqc1.0 and Diseqc1.1 spec) like this:
And I can also perfectly can use the device under Ubuntu 22.04 with Kaffeine APP:
I can scan & watch channels with Kaffeine.
However, I would like to use this device to capture Full Transport Stream, I mean whole TS file coming from a Transponder.
To achieve this, I used mumudvb as follows:
- Code: Select All Code
stulluk ~/mumu $
stulluk ~/mumu $ cat 11054v30000.conf
tuner=1
freq=11054
pol=v
srate=30000
coderate=auto
lnb_slof=11700
lnb_lof_low=9750
lnb_lof_high=10600
autoconfiguration=full
stulluk ~/mumu $
stulluk ~/mumu $
stulluk ~/mumu $ sudo mumudvb -c 11054v30000.conf --dumpfile new.ts -d
WARN: Main: You've decided to dump the received stream into new.ts. Be warned, it can grow quite fast
MuMuDVB Version 1.7.1
--- Build information ---
Built with CAM support.
Built without transcoding support.
Built with ATSC support.
Built with ATSC long channel names support.
Built with support for DVB API Version 5.
---------
Originally based on dvbstream 0.6 by (C) Dave Chapman 2001-2004
Released under the GPL.
Latest version available from http://mumudvb.braice.net/
Project from the cr@ns (http://www.crans.org)
by Brice DUBOST (mumudvb@braice.net)
Info: Main: Full autoconfiguration, we activate SAP announces. if you want to deactivate them see the README.
Info: Main: Full autoconfiguration, we activate PAT rewritting. if you want to deactivate it see the README.
Info: Main: Full autoconfiguration, we activate SDT rewritting. if you want to deactivate it see the README.
Info: Main: Full autoconfiguration, we activate sorting of the EIT PID. if you want to deactivate it see the README.
Info: Main: ========== End of configuration, MuMuDVB version 1.7.1 is starting ==========
Info: Autoconf: The autoconfiguration auto update is enabled. If you want to disable it put "autoconf_pid_update=0" in your config file.
WARN: Logs: saving_filename /var/run/mumudvb/mumudvb_generated_conf_card0_tuner1: No such file or directory
WARN: Main: Can't create /var/run/mumudvb/channels_streamed_adapter0_tuner1: No such file or directory
WARN: Main: Can't create /var/run/mumudvb/channels_unstreamed_adapter0_tuner1: No such file or directory
Info: Main: Streaming. Freq 11054000
Info: Tune: Using DVB card "TurboSight TBS 5530 DVB-T2/T/C/S/S2/S2x,ISDB-T,ATSC DVB-S/S2/S2X" tuner 1
Info: Tune: Tuning DVB-S to Freq: 1304000 kHz, LO frequency 9750000 kHz Pol:V Srate=30000000, LNB number: 0
Info: Tune: LNB voltage 13V
Info: Tune: DISEQC SETTING SUCCEDED
Info: Tune: FE_STATUS:
Info: Main: Card not tuned after timeout - exiting
stulluk ~/mumu $
So why it does not tune with MumuDVB ?
Can you also suggest to use another app that can work with Ubuntu, that allow me to capture Full TS for a given TP ?