imperia wrote:Hello abaratian,
Their drivers aren't working except the first version that comes with driver cd (i think it was 18.104.22.168 or 22.214.171.124) and the custom 126.96.36.199_new version they made for me to test. probably they work if you have very good signal, but you can't have maximum signal when you have multifeed setup on offset dish like me. When I install any other driver version and do full scan - half of my channels are gone. I am unable to tune to them anymore. When I restore 188.8.131.52_new driver everything is fine. All other drivers have lost their sensitivity and are unable to tune half of the channels. I tried to work with support to fix the problem but now they are ignoring my posts. Don't expect they to contact you with solution.
I have the same strange signal and quality values like you but at least I can watch my TV channels. Give 184.108.40.206_new driver a try. Take a note on how to correctly uninstall old drivers first.
abaratian wrote:The 220.127.116.11 that was on my cd, had two problems, 1. the lock led doesn't work. 2. the signal quality is very low.
now I'm using the 2.0.28_new, and it seems to be fine but the quality is still very low. i can't get good signal on some transponders which were good with 18.104.22.168. I think 22.214.171.124_new is probably a 126.96.36.199 with some fixes.
I think 188.8.131.52 has the major flaw of not being able to switch between high/low frequencies and only low frequencies are received. (though in some casese it could lock on high ones too) but those transponders it can receive, are received much better than 184.108.40.206_new or 220.127.116.11.
Users browsing this forum: No registered users and 1 guest