TBSDTV Community Forum

guys
could someone shed light on weither TBS products support turbo modulation with 8psk ?
if yes .. please let us know how to activate this in driver

im using TBS8922 PCI


thank you

None do. The Skywalker-1/2 is what you'd want for that.

UDL

thats really very upseting :S

i do have a jynxbox setop box with a JB200 module which support this modulation .. ths problem is .. i dont know what kind of connector should i use to plug it to my HTPC

its a 20pin connector .. but have no idea what kind of port/connector it needs

http://www.amazon.com/JynxBox-JB200-Sat ... B00BURIXUQ

now that i have wated my money on a TBS card .. i dont wana paye for another one !

do you have any idea on what kind of connector could i use to plug a JB 200 to PC ?

thank you

Trust me, you'll want a skywalker-1/2

dont waste your time/money with anything else. Its the only one that really supported.

Even if you managed to make some funky connector and built a usb interface for it, you'd still need to write drivers.

UDL

a skywalker card cost 180$ ... on the other hand .. this JB200 which does the same think .. cost 20$

your welcome to write a driver for the $20 card.

I own a skywalker-1 and is an excellent card, genpix offers exceptional support. You buy the $20 card and you'll get zero support. You'll be 100% on your own. Do you have experience writing Linux drivers? your welcome to give it a shot, there is lots of educated people out there that could help. But having datasheets helps allot.

The cypress FX2 is a well used usb interface IC, well documented and supported in linux, you'll need to write firmware for it (8051 processor) but there is lots of information on it too. Ive done a little reverse engineering products and I can tell you a very good oscilloscope and logic analyzer helps a ton !

Its a huge job either way.

UDL

Any other option than skywalker. Ginpex discontinued all cards and dont sell any more

Nope, nothing else

UDL