Moderator Control Panel ]

tbs62x0fe: attach failed

tbs62x0fe: attach failed

Postby Muzer » Fri Oct 25, 2013 11:12 pm

Hi,

I'm running Gentoo with kernel 3.10.7.

I've installed the drivers, but on startup, there appear to be errors loading the module:

Code: Select All Code
muzer@muzer-gentoo ~ $ dmesg | grep -A 5 -B 5 -i tbs                                                                                                                                                                                                                           
[    3.835155] Write protecting the kernel text: 6344k                                                                                                                                                                                                                         
[    3.835295] Write protecting the kernel read-only data: 2492k                                                                                                                                                                                                               
[    4.909046] cat (1152) used greatest stack depth: 6284 bytes left                                                                                                                                                                                                           
[    5.064731] init-early.sh (1151) used greatest stack depth: 5912 bytes left                                                                                                                                                                                                 
[    7.047547] systemd-udevd[1265]: starting version 204
[    8.233840] tbs6991se: module license 'TurboSight Proprietary: www.tbsdtv.com' taints kernel.
[    8.233844] Disabling lock debugging due to kernel taint
[    8.335548] snd_hda_intel 0000:00:1b.0: irq 46 for MSI/MSI-X
[    8.381009] IR keymap rc-tbs-nec not found
[    8.381011] Registered IR keymap rc-empty
[    8.381059] input: saa716x IR (TurboSight TBS 6280) as /devices/pci0000:00/0000:00:1c.4/0000:02:00.0/rc/rc0/input6
[    8.390011] input: failed to attach handler kbd to device input6, error: -172900352
[    8.390080] rc0: saa716x IR (TurboSight TBS 6280) as /devices/pci0000:00/0000:00:1c.4/0000:02:00.0/rc/rc0
[    8.390083] DVB: registering new adapter (SAA716x dvb adapter)
[    8.496126] systemd-udevd[1291]: renamed network interface eth0 to net0
[    9.094378] input: HDA Intel Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7
[    9.094490] input: HDA Intel Line Out as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
[    9.094539] input: HDA Intel Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
[    9.094592] input: HDA Intel Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[    9.094643] input: HDA Intel Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
[    9.094894] hda_intel: Disabling MSI
[    9.295089] tbs62x0fe: attach failed
[    9.295094] TurboSight TBS 6280: frontend initialization failed
[    9.295151] DVB: registering new adapter (SAA716x dvb adapter)
[    9.306436] tbs62x0fe: attach failed
[    9.306441] TurboSight TBS 6280: frontend initialization failed
[    9.370011] hda_codec: cannot build controls for #1 (error -16)
[    9.373017] hda_codec: cannot build controls for #2 (error -16)
[    9.376017] hda_codec: cannot build controls for #3 (error -16)
[    9.376105] input: HDA NVidia HDMI as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input12
[    9.398805] i801_smbus 0000:00:1f.3: SMBus using PCI Interrupt
muzer@muzer-gentoo ~ $


Trying to actually use the device doesn't work - the frontend files in /dev/dvb/adapterN don't exist (though net, dvr and demux files do).



EDIT: Forgot to mention, using driver 130927
Muzer
 
Posts: 7
Joined: Wed Oct 05, 2011 5:07 am

Re: tbs62x0fe: attach failed

Postby Muzer » Fri Oct 25, 2013 11:45 pm

lspci -vvnn for the card

Code: Select All Code
02:00.0 Multimedia controller [0480]: Philips Semiconductors SAA7160 [1131:7160] (rev 03)
        Subsystem: Device [6280:0011]
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 0, Cache Line Size: 32 bytes
        Interrupt: pin A routed to IRQ 16
        Region 0: Memory at efd00000 (64-bit, non-prefetchable) [size=1M]
        Capabilities: [40] MSI: Enable- Count=1/32 Maskable- 64bit+
                Address: 0000000000000000  Data: 0000
        Capabilities: [50] Express (v1) Endpoint, MSI 00
                DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <256ns, L1 <1us
                        ExtTag- AttnBtn- AttnInd- PwrInd- RBE- FLReset-
                DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
                        RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop-
                        MaxPayload 128 bytes, MaxReadReq 128 bytes
                DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
                LnkCap: Port #1, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0 <4us, L1 <64us
                        ClockPM- Surprise- LLActRep- BwNot-
                LnkCtl: ASPM Disabled; RCB 128 bytes Disabled- Retrain- CommClk-
                        ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
                LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk- DLActive- BWMgmt- ABWMgmt-
        Capabilities: [74] Power Management version 2
                Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot-,D3cold-)
                Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
        Capabilities: [80] Vendor Specific Information: Len=50 <?>
        Capabilities: [100 v1] Vendor Specific Information: ID=0000 Rev=0 Len=088 <?>
        Kernel driver in use: SAA716x TBS
        Kernel modules: saa716x_tbs_dvb


My kernel config is attached (note that I've made a small change that has fixed the RC warning, but the main issue still remains)
Attachments
config.gz
(24.91 KiB) Downloaded 326 times
Muzer
 
Posts: 7
Joined: Wed Oct 05, 2011 5:07 am

Re: tbs62x0fe: attach failed

Postby cody » Fri Nov 01, 2013 6:45 pm

Hi, the error message "tbs62x0fe: attach failed" you get means hardware fault, i.e. defective card and that the driver cannot communicate and initialize the tuner on the board. so, it has nothing to do with some software problem in Linux. please, contact us on euro_support@tbsdtv.com and support@tbsdtv.com , because it needs to be replaced with new board under the warranty. also, include information from where you purchase it. thank you.
cody
 
Posts: 627
Joined: Tue Apr 13, 2010 11:20 pm


Return to Linux

Who is online

Users browsing this forum: No registered users and 1 guest

cron