Sorry for my English.
Help me please! Do not load module saa716x_tbs_dvb for TBS-6220. On the same system TBS-6920 works fine.
# uname -a
- Code: Select All Code
Linux openelec 3.1.5 #1 SMP PREEMPT Sat Dec 10 18:15:41 EET 2011 i686 GNU/Linux
# dmesg
- Code: Select All Code
[ 6.080212] udevd[204]: starting version 175
[ 6.653563] tbs6928fe: module license 'TurboSight Proprietary: www.tbsdtv.com' taints kernel.
[ 6.653572] Disabling lock debugging due to kernel taint
[ 6.703215] Registered IR keymap rc-rc6-mce
[ 6.703477] input: Media Center Ed. eHome Infrared Remote Transceiver (0bda:0161) as /devices/pci0000:00/0000:00:16.2/usb3/3-3/3-3:1.2/rc/rc0/input5
[ 6.703639] rc0: Media Center Ed. eHome Infrared Remote Transceiver (0bda:0161) as /devices/pci0000:00/0000:00:16.2/usb3/3-3/3-3:1.2/rc/rc0
[ 6.710233] input: MCE IR Keyboard/Mouse (mceusb) as /devices/virtual/input/input6
[ 6.710634] mceusb 3-3:1.2: Registered Generic USB2.0-CRW on usb3:2
[ 6.710702] usbcore: registered new interface driver mceusb
[ 6.921089] snd_hda_intel 0000:00:01.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 6.921169] snd_hda_intel 0000:00:01.1: irq 44 for MSI/MSI-X
[ 6.922213] snd_hda_intel 0000:00:01.1: setting latency timer to 64
[ 6.990378] saa716x_tbs_dvb: Unknown symbol i2c_bit_add_bus (err 0)
[ 7.060175] HDMI status: Codec=0 Pin=3 Presence_Detect=0 ELD_Valid=0
[ 7.063785] input: HD-Audio Generic HDMI/DP as /devices/pci0000:00/0000:00:01.1/sound/card0/input7
# lspci -vvnn
- Code: Select All Code
01:00.0 Multimedia controller [0480]: Philips Semiconductors SAA7160 [1131:7160] (rev 03)
Subsystem: Device [6220:0002]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 7
Region 0: Memory at fea00000 (64-bit, non-prefetchable) [size=1M]
Capabilities: [40] MSI: Enable- Count=1/32 Maskable- 64bit+
Address: 0000000000000000 Data: 0000
Capabilities: [50] Express (v1) Endpoint, MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <256ns, L1 <1us
ExtTag- AttnBtn- AttnInd- PwrInd- RBE- FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop+
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr- UncorrErr+ FatalErr- UnsuppReq+ AuxPwr- TransPend-
LnkCap: Port #1, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0 <4us, L1 <64us
ClockPM- Surprise- LLActRep- BwNot-
LnkCtl: ASPM Disabled; RCB 128 bytes Disabled- Retrain- CommClk-
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk- DLActive- BWMgmt- ABWMgmt-
Capabilities: [74] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot-,D3cold-)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [80] Vendor Specific Information: Len=50 <?>
Capabilities: [100 v1] Vendor Specific Information: ID=0000 Rev=0 Len=088 <?>
# modprobe saa716x_tbs_dvb
- Code: Select All Code
modprobe: can't load module saa716x_tbs_dvb (tbs/saa716x_tbs-dvb.ko): unknown symbol in module, or unknown parameter