Moderator Control Panel ]

Card not seen after successful compile on 4.3.3 Kernel?

Card not seen after successful compile on 4.3.3 Kernel?

Postby pinsb » Wed Jan 27, 2016 6:08 pm

Kernel 4.3.3-301 Fedora Core 23 x86_64.

This is a new build on a new box.

Card IS seen by hardware (please note although I'm showing this with the 6280 card it applies to both the 6280 and 6284 - I had to put the 6284 back into the production box).

>:lspci -vv -s 2:00.0
02:00.0 Multimedia controller: Philips Semiconductors SAA7160 (rev 03)
Subsystem: Device 6280:0011
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin A routed to IRQ 10
Region 0: Memory at f7b00000 (64-bit, non-prefetchable) [disabled] [size=1M]
Capabilities: [40] MSI: Enable- Count=1/32 Maskable- 64bit+
Address: 0000000000000000 Data: 0000
Capabilities: [50] Express (v1) Endpoint, MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <256ns, L1 <1us
ExtTag- AttnBtn- AttnInd- PwrInd- RBE- FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop+
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr- UncorrErr+ FatalErr- UnsuppReq+ AuxPwr- TransPend-
LnkCap: Port #1, Speed 2.5GT/s, Width x1, ASPM L0s L1, Exit Latency L0s <4us, L1 <64us
ClockPM- Surprise- LLActRep- BwNot- ASPMOptComp-
LnkCtl: ASPM Disabled; RCB 128 bytes Disabled- CommClk-
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk- DLActive- BWMgmt- ABWMgmt-
Capabilities: [74] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot-,D3cold-)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [80] Vendor Specific Information: Len=50 <?>
Capabilities: [100 v1] Vendor Specific Information: ID=0000 Rev=0 Len=088 <?>
Kernel modules: saa716x_tbs_dvb

No problems during the compile (I've done this stuff before)

TBS Driver Version 151229

Tried swapping the cards into different slots...no difference.

dmesg does not report the card at all (suggesting driver issue).

Any ideas?
pinsb
 
Posts: 13
Joined: Mon Aug 05, 2013 7:30 am

Re: Card not seen after successful compile on 4.3.3 Kernel?

Postby pinsb » Wed Jan 27, 2016 6:13 pm

Just noticed that the download link is saying driver 160126

however the file downloaded is 151229.zip

caching issue on your server?
pinsb
 
Posts: 13
Joined: Mon Aug 05, 2013 7:30 am

Re: Card not seen after successful compile on 4.3.3 Kernel?

Postby cody » Wed Jan 27, 2016 6:21 pm

pinsb Wrote:Just noticed that the download link is saying driver 160126

however the file downloaded is 151229.zip

caching issue on your server?


yes, on this, we will fix it ASAP. on the issue, please, provide full dmesg log first..
cody
 
Posts: 627
Joined: Tue Apr 13, 2010 11:20 pm

Re: Card not seen after successful compile on 4.3.3 Kernel?

Postby pinsb » Wed Jan 27, 2016 6:37 pm

Cody

Don't want to post full dmesg here....

OK if I post it to euro support mail address?
pinsb
 
Posts: 13
Joined: Mon Aug 05, 2013 7:30 am

Re: Card not seen after successful compile on 4.3.3 Kernel?

Postby pinsb » Wed Jan 27, 2016 7:39 pm

Cody

I've emailed both the dmesg and the more expansive journalctl for the boot.

Pls just confirm you have received if you could.

Regards
pinsb
 
Posts: 13
Joined: Mon Aug 05, 2013 7:30 am


Return to Linux

Who is online

Users browsing this forum: No registered users and 5 guests