Moderator Control Panel ]

MOI & CAM & oscam

Anything from the case design to the chip inside, from expectation to suggestion, the most important thing is, you are IN.

Re: MOI & CAM & oscam

Postby eesdil » Sat May 18, 2013 1:43 am

so I did what you wrote and it means in that case that I dont have descrambled channel in VLC.

If I use gnutv I can have not crypted channels, working with your tool also. but I cannot get anything if I go for encrypted channels.
If I use dvblast it is working and it is descrambling the channels, I am not sure it helps or not.
eesdil
 
Posts: 29
Joined: Sat Apr 27, 2013 4:19 pm

Re: MOI & CAM & oscam

Postby gfi » Sat May 18, 2013 2:12 am

eesdil Wrote:so I did what you wrote and it means in that case that I dont have descrambled channel in VLC.

If I use gnutv I can have not crypted channels, working with your tool also. but I cannot get anything if I go for encrypted channels.
If I use dvblast it is working and it is descrambling the channels, I am not sure it helps or not.


Yes, it help me.

So, I'm really don't know, why isn't correctly detected Your CI in gnutv.

Re-insert Your CAM, and type dmesg.
Put result here.


That's correctly initialization of CI (nCam, CI+):
CAM Application type: 01
CAM Application manufacturer: 0b00
CAM Manufacturer code: 8001
CAM Menu string: Conax ITI CIPLUS CAM
CAM supports the following ca system ids:
0x0b01
-------------------

I have an upgraded libs for dvb-apps, but I don't think it help You.
gfi
 
Posts: 114
Joined: Tue Mar 05, 2013 10:55 pm

Re: MOI & CAM & oscam

Postby eesdil » Sat May 18, 2013 2:50 am

i have these 2 files, one for dmesg what I have in the log and the log from dvblast if i use it for encrypted channel.

Logs.zip
(3.42 KiB) Downloaded 326 times
eesdil
 
Posts: 29
Joined: Sat Apr 27, 2013 4:19 pm

Re: MOI & CAM & oscam

Postby eesdil » Sat May 18, 2013 2:54 am

strange if I have the card in and start watching not encrypted channels I get this:
# gnutv -adapter 0 -channels /root/channels.conf -out rtp 239.255.0.1 1234 'CT 24'
Using frontend "TurboSight TBS 2990 DVBS/S2 frontend", type DVB-S
status SCVYL | signal 7256 | snr ffff | ber 03ffffff | unc 00000000 | FE_HAS_LOCK
en50221_tl_handle_sb: Received T_SB for connection not in T_STATE_ACTIVE from module on slot 00

en50221_stdcam_llci_poll: Error reported by stack:-7

CAM Application type: 01
CAM Application manufacturer: cafe
CAM Manufacturer code: babe
CAM Menu string: Irdeto Access
CAM supports the following ca system ids:
0x0fff
Received new PMT - sending to CAM...
CAM supports the following ca system ids:
0x0624
eesdil
 
Posts: 29
Joined: Sat Apr 27, 2013 4:19 pm

Re: MOI & CAM & oscam

Postby gfi » Sat May 18, 2013 2:59 am

eesdil Wrote:debug: opening MMI session (4)
debug: sending DisplayReply on session (4)
debug: MMI title: Irdeto Access
debug: MMI subtitle: PROMPT
debug: MMI bottom: Press 'OK' or 'EXIT' to quit.
debug: MMI choice: E120-4 Please wait, while the
debug: MMI choice: card is being synchronized.
debug: closing MMI session (4)


OK, try to disable messages in Your cam, if is possible.
(I wrote about that, above...)

gnutv -cammenu
gfi
 
Posts: 114
Joined: Tue Mar 05, 2013 10:55 pm

Re: MOI & CAM & oscam

Postby eesdil » Sat May 18, 2013 3:52 am

yep, but didnt find anything like that

putting here the menus i found:

Irdeto Access
IRDETO - MAIN
0. Quit menu
1. Irdeto CA Status
2. Select a language
3. CAM Management
4. Text Message

------------------------------
Irdeto Access
DVB Client (PVR) 3.10.30
0. Quit menu
1. Smart Card Status
2. SoftCell Service Status
3. Loader Status
4. Product Status

------------------------------

Irdeto Access
CAM Management
0. Quit menu
1. CAM Info
2. CI Plus Info
3. CAM software upgrade
4. Reset Factory Default
5. Maturity Rating

------------------------------
Irdeto Access
CAM Info
0. Quit menu
1. CAM SW: IRD-SCL3SECPLUSGRC-4.2.4.4 m2
2. CAM HW: 4.0.3
3. Serial No: 130915941
4. CAM Build Date: Aug 10 2011
5. ManufactureCode: 90
6. L-002 KEY: 285, 0, 2
7. Loader Version: 3.6
8. Loader Variant: 285

------------------------------
Irdeto Access
CI Plus Info
0. Quit menu
1. Device Type Name: CAM-1660
2. CI+ Software Version: V1.0
3. CI+ Hardware Identification: 4000

------------------------------
Irdeto Access
No Message!
0. Quit menu
1. Exit


Irdeto Access
Smart Card Status
0. Quit menu
1. Status: D00-4 Card In
2. Number: 4280263385(1)
3. Type: 0x0006
4. Version: 6.0
5. Build: 1
6. Variant: 0
7. Patch Level: 0
8. Owner ID: 0x18d
9. Nationality: CZE

------------------------------
Irdeto Access
DVB Client Services
0. Quit menu
1. Handle Name Instance Description
Press 'OK' to select; Press 'EXIT' to quit.
Enter option:

Irdeto Access
Loader Status
0. Quit menu
1. Device: 0x5a, 6, 285
2. Key: 285, 0, 2
3. CSSN: 2148250074
4. L-002
5. Loader Version: 3.6

------------------------------
Irdeto Access
Product Status
0. Quit menu
1. Sector ID Data Code
2. Sector 0 4886


eesdil
 
Posts: 29
Joined: Sat Apr 27, 2013 4:19 pm

Re: MOI & CAM & oscam

Postby gfi » Sat May 18, 2013 4:08 am

Ok, maybe You need start on free tv.
Next step:
You need to upgrade Your dvbapps libraries.
I send You 2 archives with dvb-apps libraries (backup and new). (I have another rootfs, need a some time for update a new MOI to default rootfs).

So, just only test and only for you.
Give me a 2 minutes.
gfi
 
Posts: 114
Joined: Tue Mar 05, 2013 10:55 pm

Re: MOI & CAM & oscam

Postby gfi » Sat May 18, 2013 4:29 am

Ok,

You need a replace existing libraries in /usr/lib with libraries in archive 'dvbapps-new-libs.tar.gz'.

You can downgrade to default state with libraries in archive 'dvbapps-default.tar.gz'

1.
Place gnutv-rem (remote) on /tmp. In archive 'gnutv-rem.tar.gz'
chmod 755 gnutv-rem

2. Use some commands, like You used with CT 24 channel (or any FTA channel).
Wait to ID of cam is 0x0624 (!!)

3. Type on your console channel, what You need (for example Nova TV) and Enter.
(channel name must exist in Your config file)

4. run ./netdvr-moi and control, if channel is descrambled over vlc.
Attachments
gnutv-rem.zip
(11.19 KiB) Downloaded 250 times
dvbapps-new-libs.tar.gz
(333 KiB) Downloaded 231 times
dvbapps-default.tar.gz
(517.5 KiB) Downloaded 213 times
gfi
 
Posts: 114
Joined: Tue Mar 05, 2013 10:55 pm

Re: MOI & CAM & oscam

Postby eesdil » Sat May 18, 2013 5:23 am

I am getting these messages:
libdvbpsi error (misc PSI): Bad CRC_32 (0xa8d65135) !!!


not sure it matters or not
And not sure what is happening, I am trying to put the channel name, like and getting error message (If Console means VLC console)
Prima COOL
Unknown command `rm'. Type `help' for help.

Unknown command `ia'. Type `help' for help.


Like it would be because of UTF or dont know...
eesdil
 
Posts: 29
Joined: Sat Apr 27, 2013 4:19 pm

Re: MOI & CAM & oscam

Postby gfi » Sat May 18, 2013 5:26 am

eesdil Wrote:I am getting these messages:

And not sure what is happening, I am trying to put the channel name, like and getting error message (If Console means VLC console)
Prima COOL
Unknown command `rm'. Type `help' for help.

Unknown command `ia'. Type `help' for help.


Like it would be because of UTF or dont know...


Not vlc console command, but in Your SSH console.

libdvbpsi error (misc PSI): Bad CRC_32 (0xa8d65135) !!!


You need send a full log, for more info.
gfi
 
Posts: 114
Joined: Tue Mar 05, 2013 10:55 pm

PreviousNext

Return to General discussion

Who is online

Users browsing this forum: No registered users and 2 guests