TBSDTV Community Forum

Then again, after reboot, no working again.
Something is not right here...

The scan-s2 results: scan-s2 -a1 ses1-101w API major 5, minor 1 ERROR: Cannot open rotor configuration file 'rotor.conf'. scanning ses1-101w using '/dev/dvb/adapter1/frontend0' and '/dev/dvb/adapter1/demux0' initial transponder DVB-S 12060000 H 26700000 3/4 AUTO AUTO initial transponder DVB-S2 12060...

OK, some progress! sudo szap-s2 -c channels.conf -S 0 "HEST" -l 10750,10750,11700 -a 1 reading channels from file 'channels.conf' zapping to 1 'HEST': delivery DVB-S, modulation QPSK sat 0, frequency 12060 MHz H, symbolrate 26700000, coderate auto, rolloff 0.35 vpid 0x04ba, apid 0x04b0, si...

I wound up re-installing the OS, rebuilding and installing the drivers, and I've run szap-s2. Here are the results: ./szap-s2 -c channels.conf -p -r -S 0 "HEST" -l 10750,10750,11700 reading channels from file 'channels.conf' zapping to 1 'HEST': delivery DVB-S, modulation QPSK sat 0, frequ...

Single LNB, 10750 LO, no switches
Thanks for the information, I'll give it a run.

From lyngsat website, ses1.html:

12060 V, TP18, "History East". I have a Geosatpro DSR200c receiver and this channel comes in with good signal (75) and quality (90).

I'm having trouble creating a usable file. The satellite is SES1 at 101W, or Galaxy19 at 97W.

With Mythtv-backend NOT running, this is the result of scan: doug@htpc:/shared/tbs6981$ scan -5 -U -l 10750 ses1-101w scanning ses1-101w using '/dev/dvb/adapter0/frontend0' and '/dev/dvb/adapter0/demux0' initial transponder 12060000 H 26700000 3 >>> tune to: 12060:h:0:26700 DVB-S IF freq is 1310000 ...

Posting here might be helpful to someone else.
Thanks for responding!

Running Ubuntu 10.04, MythTV. Built and installed the latest drivers, V1.92.2. During Mythbackend setup, I try to scan a satellite, but the scan fails. I know the sat setup is OK, I have a working sat receiver and am pointed at the right sat, good signal and all. Using scan-s2, it returns this: doug...