TBSDTV Community Forum

Hi,
Has anyone tried ATSC Cable/QAM B on TBS6290SE?

dvblast doesn't even show me any signal. DVB-C and DVB-T work fine.

Regards,
Nuno MOta

I ran into the same issue. Kernel 3.0.0. The patch on this thread fixed it.

HI UDL,

Thank you for the feedback.

Regards
NRM

This is what I get with the femon command line. status SCVYL | signal 55% | snr 74% | ber 0 | unc 0 | FE_HAS_LOCK status SCVYL | signal 55% | snr 73% | ber 0 | unc 0 | FE_HAS_LOCK status SCVYL | signal 55% | snr 74% | ber 0 | unc 0 | FE_HAS_LOCK status SCVYL | signal 55% | snr 73% | ber 0 | unc 0 | ...

Maybe this will help. If you have a wifi card, VLC will use the first IP in the stack. You need to prioritize the NIC where you are receiving the multicast (LAN I presume). https://forum.videolan.org/viewtopic.php?t=78872#p287162 On another note, multicast might not work properly in household router...

I also have a TBS6814 in the same setup, but that one doesn't work properly. It happens both with the TBS drivers and the Open source drivers. A lot of discontinuities and errors trying to lock the same frequency. Crazycat can you help me? In this example I'm using a Ubuntu 16.04 with latest upstrea...

I always get ahead of myself.... ISDB-T Working flawlessly ./dvblast -a 0 -n 0 -f 497000000 -r /tmp/adapter4.sock -5 ISDBT -b 6 -m qam_64 -G 16 -r /tmp/adapter1.sock DVBlast 3.1 (git-3.0-15-g12a1eb9-dirty) warning: restarting debug: compiled with DVB API version 5.10 debug: using DVB API version 5.1...

Hi, I've been testing this TBS board in linux both with TBS drivers and the open source drivers. I'm getting a lot of discontinuities and Transport errors when using the normal TBS drivers. The same RF cable works perfectly in a TV. CAM00346.jpg A x8227 Geniatech works fine under the same conditions...

Hi , I've been trying to lock ISDB-T signal but so far I'm only able to lock DVB-T. I'm using dvblast 3.1. All I get is a DVB: lock status is 00. I remember using a x8227 board from geniatech and changing nothing at all to make the ISDB work. Plain DVB-T settings would work. I suppose there's someth...

Hi,

Unfortunately I wouldn't count on all TBS drivers to work on ARM unless you use a TBS distribution. Only some TBS USB open source drivers are known to work in ARM distributions.

Check this thread: viewtopic.php?f=34&t=7563