TBSDTV Community Forum

Not ", but ' - not important. In Your printenv missing ${filesize}. Control, what You're doing. You have: updatekfs=nand erase 50c0000;nand write.yaffs c0008000 50c0000 I wrote: setenv updatekfs 'nand erase 50c0000;nand write.yaffs c0008000 50c0000 ${filesize}' ok now it is ok, it is important...

i see difference in automatic and manual writing: automatic looks: NAND write: device 0 offset 0x50c0000, size 0xaf40000 Input block length is not page aligned Data did not fit into device, due to bad blocks 183762944 bytes written: ERROR manual: nand write.yaffs c0008000 50c0000 ${filesize} NAND wr...

thank you, i use you setting: setenv updatekfs "nand erase 50c0000;nand write.yaffs c0008000 50c0000 ${filesize}" but it doesnt helps me. OK U-Boot 1.3.4 (Mar 7 2013 - 16:38:41) for MOI2900 CPU: [email protected](OK) APLL = 1000MHz, HclkMsys = 200MHz, PclkMsys = 100MHz MPLL = 667MHz, EPLL = ...

Hello, manual update works for me. after that automatic update from 1.1 to 1.2 works except MOI2900_fs.bin i do again manual command and this works. what should i do, to make automatic update works, manual update works, but i must always remember that. thank you for help. (now my MOI box has fw 1.2 ...

Hello,

i try only rootfs,no success. Looks like internal NAND is corrupted.

i can give you access to this device over ssh/minicom if you need it.

Hello,

sending log captured by minicom.

Hello, i try to update firmware 1.1. to 1.2 but it fail, as here: NAND erase: device 0 offset 0x50c0000, size 0xaf40000 Skipping bad block at 0x052e0000 Skipping bad block at 0x05fc0000 Skipping bad block at 0x0b460000 Skipping bad block at 0x0c860000 Skipping bad block at 0x0f320000 Erasing at 0xff...