TBSDTV Community Forum

I tried connecting my TBS5990 to MOI+ today. It shows up in /dev/dvb as adapter4 and adapter5 , [[email protected] /]# ls /dev/dvb/ -al total 12 drwxr-xr-x 1 root root 2048 Jan 13 2002 . drwxr-xr-x 1 root root 2048 Jan 17 2002 .. drwxr-xr-x 1 root root 2048 Jun 21 2001 adapter0 drwxr-xr-x 1 root root 2048 Ju...

Well, I installed 1 6984 and one 6991SE, which should show 6 adapters total, and here we are: [[email protected] /]# dmesg|grep dvb DVB: registering new adapter (SAA716x dvb adapter) DVB: registering new adapter (SAA716x dvb adapter) DVB: registering new adapter (SAA716x dvb adapter) DVB: registering new ada...

Not yet, unfortunately. As for splitter ( http://www.microsatacables.com/pci-e-ex ... h-usb-3-0/ ) it works fine on PC with 4 TBS6904 (16 total transponders), I was just curious, if I could manage the same with cheaper MOI+.

Thanks, costan, I will actually try this tomorrow and post results here.

Actually, no answer since then.

Well, it's not 2, more like 4 cards. It seems a bit of waste of CPU, when you look at "top" - 5-6% per transponder. And - its a pure scientific interest. I contacted support and they are looking into this. It seems like this limitation is not intentional, more like unexpected side-effect.

Unfortunately no result: [[email protected] /]# ls /dev/dvb -la total 12 drwxr-xr-x 1 root root 2048 Jun 15 2001 . drwxr-xr-x 1 root root 2048 Jun 18 2001 .. drwxr-xr-x 1 root root 2048 Jun 15 2001 adapter0 drwxr-xr-x 1 root root 2048 Jun 15 2001 adapter1 drwxr-xr-x 1 root root 2048 Jun 15 2001 adapter2 drwx...

Thanks a lot, xiaocao!

I will try this in the evening and report on results. This MOI+ box looks more and more attractive as time passes.

Hello, I'm into little experiment here (I hope things like this are not mentioned in Geneva convention): http://i.imgur.com/Dj1aO5X.jpg Long story short - I connected PCIe splitter to MOI+ and plugged 3 different TBS DVB-S2 cards in it: 6991, 6991SE and 6985, totaling at 8 logical adapters. All 8 of...

One more thing - on some servers (mainly HP) you should switch PCIe to x1 mode and ensure, that proper voltage is supplied, either from PCEe settings, or by connecting ATX power directly to TBS card.