TBSDTV Community Forum

Hello I complete drivers and all working fine , just I have single tuner board not working well , its read tuner 0 and some time i got the failure below. its hardware issue or software ? dmesg | grep frontend [ 14.489751] TBSECP3 driver 0000:09:00.0: DVB: registering adapter 0 frontend 0 (TurboSight...

2nd part < <div style="width: 100%"> <meter id="meter_item" min="0" value=<?php $sig = shell_exec('dvblastctl -r /tmp/3.sock fe_status | grep -i "snr"| cut -d\: -f2 | sed -e "s| ||g" '); $sig = intval ($sig / 655,2); echo $sig;?> max="100" ...

Hello I just complete php page for tunner signal SNR and signal strength for running dvblast , need to add -r /tmp/1.sock to dvlast command for example dvblast -a 1 -e -Y -W -f 12340000 -s 27500000 -v 18 -m psk_8 -r /tmp/4.sock -c /root/dvblast_3.conf the code for page to read from soct that made on...

please update the manual https://www.tbsiptv.com/download/tbs6904/tbs6904_user_guide.pdf wget https://www.tbsiptv.com/download/common/tbs-linux-drivers_v170330.zip unzip tbs-linux-drivers_v170330.zip sudo rm -rf /lib/modules/`uname -r`/kernel/drivers/media/* ./v4l/tbs-x86_64.sh make && make ...

This example of using TV Headend with RTMP server transcoding using ffmpeg idea its SAT==> LNB ===> MOI <===> RTMP Linux Server <====> Clients ffmpeg -re -y -i "http://192.168.1.188:9981/stream/channelid/2?ticket=72E96A4FAE08854FD3E0F0C8863C4F625AF5CCE2" -b 500k -maxrate 500k -bufsize 500k...

what is freq and symbol rate you add , freq in KHz and symblol in Kbps you need to add 000 after for example 11747000 and 27500000
and try to connect in CLI mode telnet 192.1.xxx ip of MOI

then use dvblast or else to check the streams.

Hello

If you try to upload some files into MOI its better use WinSCP , SSH not support SFTP on Just select SCP file protocol and put IP of MOI with port of 22

Then you can send and receive file.

also if you want install webmin and then you can manage Linux box as you like.


Regards.

dvblast -u -a 1 -f 10890000 -s 27500000 -v 13 -F 78 -m psk_8 -Y -U -d 239.0.0.1:1205


f- Frequency
s- symbol rate
-v LNB Voltage H=18 , V=13
-m modulation , qpsk , or psk_8 , QAM, etc.
-U mean udp with out -U will be RTP protocol (( this is your issue ))
-d the destination Multicast IP and port

I posted it too many time , no one support us. why they put the PCMCIA slot even no use for it. im use Mouse card reader for normal Irdeto and viacess , but problem with chip peering of My-HD the use Secure CAM that can not work with any card reader , im try to get USB to PCMCIA adapter to use it wi...

Hello

when I view 3 channels I got cpu 100%


only two can run with low cpu load.



is there is wrong in my config ?

these channels use CCAM client.

Ahmed