TBSDTV Community Forum

Hi! I recently bought a Firefly AIO3588Q developer board. I woult like to build the TBS tuner Driver for Debian 11. System date: Atchitecture : Arm64 Linux kernel : 5.10.100 cc, c++, g++ version : 10.2.1 I installed all the programs required for build. Compilation starts after issuing the make -j4 c...

Hi!

For TBS 2910 V1.3 with OpenELEC 5.0.8:

fan control:

echo default-on > /sys/class/leds/fan/trigger --> fan on
echo none > /sys/class/leds/fan/trigger --> fan off


bzoli72

Cjcr Wrote:Hi,

Any idea why this happens? It happened after a power cut and never go back. The problem is resolved if reinstall the image ... there's any other way?

photo_2015-03-28_16-11-13.jpg

Hi CjCr!

Unplug the SD card or any usb drive and reboot the TBS2910.

bzoli72

Hi vpeter!

I upgraded openELEC 5.0.4 to 5.0.6.
5.0.6 working fine.
But the blue LED flashes. This is quite disturbing .
How to turn off the blue LED ?

My soc-fan-monitor.conf:

high=70
low=55
interval=30
debug=0

Cooling fan not working. Why?

Thanks: bzoli72

Hi vpeter!

OpenELEC 5.0.4 working on my TBS2910 v1.3.
Thanks.
The cooling fan is not operating.
CPU temperature 70°C

bzoli72

Thanks vpeter!

Reinstall OpenELEC 5.0.0. with new uenv-matrix.txt
Attached new start log.


bzoli72

Hi vpeter!

In booting process TBS2910 the TV screen also displays a log.
How can I capture the logs from TV? (Or redirect to serial port?)

Thanks bzoli72

with modified uenv.txt Post the content of this file. mmcargs=setenv bootargs 'boot=/dev/mmcblk0p1 disk=/dev/mmcblk0p2 progress debugging video=mxcfb0:dev=hdmi,1920x1080M@60,if=RGB24,bpp=16 dmfc=3' uenvcmd=if test -n $ethaddr; then true; else setenv ethaddr 1E:ED:19:27:1A:B2; fi

Just need to change uEnv.txt (replacing quiet parameter), reinstall, capture log. Hi vpeter! I installed OpenELEC 5.0.0. again with modified uenv.txt. The result has been mounted on page 14. In Install and start v2.zip. In start script not double start log. After first "Starting kernel..."...

Hi vpeter!

Please send me, how to start installed OpenELEC 5.0.0 from serial console.
setenv parameters, bootm, etc...

Thanks: bzoli72