TBSDTV Community Forum

Hello tayloirit & piotrasd. I spent several evening trying to update the MOIPRO , since I own many of them. But I did not have much success. My goal was to update the kernel to at leas version 4.x , so I compiled Yocto (morty version) based on info given on the Boundary Devices website. The MOIP...

Hi, Thanks for the ideas - LibreElec & openbricks/geexbox. No joy : I had a hard time building the image, to finally find out that it does not handle the PCIe bridge as I expected. I'm fed up - This basically mean it's currently impossible to pull DVB-S2 Multistream / PLS stream from 5W (and oth...

there is full setup for TBS2910 - do make menuconfig and choose device ... ;) and for DVB drivers you can use opensource drivers. That's what I'm doing, and will soon try the filesystem on a MOIPro. But the TBS2910 (Matrix) is still different from MOIPRO, especially regarding the PCI stuff (2xPCIe ...

This is nice. However I could only find support for TBS2910 (Matrix) which is similar to MoiPro (imx6-based), but lack an important piece of code: The PCIe Bridge, and other details like for the LCD (less critical I admit). So we still need a patch , SDK, whatever needed to rebuild by ourself the fi...

Hello, Like piotrasd here http://www.tbsdtv.com/forum/viewtopic.php?f=165&t=9939 I would like to compile my own packages for MOI-Pro (IMX6). According to /etc/os-release , the firmware is build over MatrixTV ( https://sourceforge.net/projects/matrixtv/ ) with some moi-pro specific changes, using...

I found a solution. When you clic "upload", the dialog showing that the upload is one immediatly jumps at you. Do NOT click "OK" at this time - wait for the actual upload to finish (I use a network monitor in the task bar, and wait until the "upload" from my PC stops). ...