TBSDTV Community Forum

@sami8519: I do not have the 6pin cable, I was informed it is only necessary if you use a rotor. In any case if the power supply is OK for connection to Port 2 I understand it is sufficient to make Port 1 work (only one port is used at a time, as I do not have a second dish yet). @veehexx: I have in...

After installing and uninstalling different driver versions and different patches I found on the internet I always had failure. No lock could be achieved.

Then I installed the latest driver again and tried adapter port LNB2 (adapter0). Success.

I do not understand, is my adapter port 1 faulty?

All abovementioned builds are using the latest driver (2011/08/18). I thought of trying the instructions at http://blog.mohammadzadeh.info/index.php/howto-install-the-tbs-6980 for building the module. The build procedure is successful, the module loads but still no lock can be obtained. The above in...

I have blacklisted bttv and used default settings for modules i2c-algo-bit and tvaudio. No success. I have recompiled the latest drivers using make clean, make distclean, make rminstall and then ./v4l/tbs-x86_64.sh, make, make install and reboot. No again success. I have changed the cable and now it...

I reconnected cables and rebooted server. Then run the commands you instructed: root@srv1:~/tbs-110818/szap-s2# ./szap-s2 -c ../hotbird_szap-s2.conf "RAI1" -S 0 -C 23 -H -a 1 -f 0 -l UNIVERSAL reading channels from file '../hotbird_szap-s2.conf' zapping to 1 'RAI1': delivery DVB-S, modulat...

Hello SergioDanielG, Thank you for your feedback. The TBS6981 driver delivers two adapters root@srv1:~/tbs-110818# ls -l -R /dev/dvb/ /dev/dvb/: total 0 drwxr-xr-x 2 root root 120 2011-09-23 22:54 adapter0 drwxr-xr-x 2 root root 120 2011-09-23 22:54 adapter1 /dev/dvb/adapter0: total 0 crw-rw---- 1 r...

Hello, I understand I should get status "LF" and indication "FE_HAS_LOCK" for singal 74% (like in similar topic) and I get: root@srv1:~/tbs-110818/szap-s2# ./szap-s2 -a 1 -H -C 34 -c ../hotbird_szap-s2.conf "RAI2" reading channels from file '../hotbird_szap-s2.conf' zap...