TBSDTV Community Forum

we support MIS/PLS, you don't need 5.10 for that, check the readmes or the forum:

viewtopic.php?f=167&t=9707&p=34680&hilit=0x40200b#p34680

it's "critical and not easy for many people", but only in your own opinion, not in general case, because otherwise we will be flooded with many complains, but we're not! in fact we have no complains about it. i guess, there is good reason for that. so, majority of our Linux users are doing...

Hello, are you sure you're using correct MIS ID and PLS Root code? I've tested all those TPs on 5W few months ago and they were working fine. here is full details how you can test with our official drivers: here is how to fix DVBlast - it needs 2 lines patched to support MIS/PLS properly - so in: ht...

in some Linux kernels IRQF_DISABLED is not defined. that's why you get it's "undeclared", but the value of that constant is '0'. so, you can open the driver source code file in any text editor and replace every occurrence of IRQF_DISABLED with 0 - then save and build. if there are many suc...

@fordfrog not really, it actually depends on what DiSEqC switch and setup you have in mind. So, first as general rule if 6909 card driver is set to Multi-Switch mode then all 4 ports on the same card need to be connected to the same satellite in order to have all bands/polarities. however, the card ...

pinsb Wrote:Just noticed that the download link is saying driver 160126

however the file downloaded is 151229.zip

caching issue on your server?

yes, on this, we will fix it ASAP. on the issue, please, provide full dmesg log first..

hi, maybe it's problem related to the USB port. i have few suggestions: * check your BIOS and if there is option set USB port to Legacy Mode, then test the work again * disable IR on 5922 in the following way: - open in text editor: linux-tbs-drivers/linux/drivers/media/dvb/dvb-usb/tbs5923.c - scrol...

After upgrading to the latest driver (151229) this problem got significantly worse, and I started to see continuity errors every minute or two. Reverted back to the previous driver (151105) and am now back to seeing occasional continuity errors but there's at least 10-15 minutes between them. there...

i guess what you want to build from staging in lirc, there is simple workaround - on the steps you listed here: http://www.tbsdtv.com/forum/viewtopic.php?f=153&t=9702#p34645 you skip the one where you run "make menuconfig", then after run "make" don't wait the build to finish...

what about measure for 20-30 mins the errors with TransEdit?