TBSDTV Community Forum

Hi sir
From the pictures, the CAM was not deceted, is the CAM's light on? Could you show me the pictures the card with CAM ?
or Could you give me the remote access to check it? email to me Davin@tbsdtv.com

Best Regards

Do you have try running the applcation as admin?

please try the tools
https://www.tbsiptv.com/download/common ... 0.0.10.zip
the tools will read the CAM MMI info.
BTW. check your CAM if expired.

Best Regards

Hello
if so ,it can not be rule out that the hardware is broken.
Could you give me the remote access to check it.send email to me Davin@tbsdtv.com

Thanks

This is the entire spectrum from 3800 to 4200. It doesn't matter which transponder it is, but some are worse than others. A few examples: 99.2°W 4120 H 30000; 8PSK; FEC 9/10; SNR 12.8 to 14.3 4141 V 31547; 8PSK; FEC 3/4; SNR 10.5 to 12.5 97.0°W 4028 V 6111; QPSK; ; FEC 3/4; SNR 13.9.14.5 4080 V 342...

Hi sir

sorry for delay reply. is the issues sovled?
Do you have try the latest drvers V1007?

Best Regards

Hi sir
sorry, this is our mistake, forget update the release description.
v2005 : fixed an error when ACM signal could not be displayed. and optimized blindscan funcation.
Could you give me the remote access to check the problem on your there? send email to me Davin@tbsdtv.com

Best Regards

hi
Do you install the latest drivers (V1.0.1.4)?
and install the latest version of dvbdream or dvbviewer from the office web.

Best Regards

Hi sir
The cards 's chip may be broken.
please contact your sales to apply for after-sales service.

Best Regards

Hi sir
if you using dvbs/s2 mode , you need connect to 4 signal cable, one signal cable for two adapter. it is different with 6909.
if you using dvb-t or dvbc signal. you just need 1 *signal cable. connect to "RF IN" port.

Best Regards