TBSDTV Community Forum

Hi, I am really struggling to make manual scan using scan-s2 tool and yavdr. My DVB card tuners are recognized and I have installed the scan-s2 tool in the path /usr/local/bin. When I run the command scan-s2 -a 0 astra_scan-s2.conf always tuning failed. I used this option to locate the lnb position ...

Thanks alot mate for reporting your results. Much appreciated. Will try it as soon as i have an opportunity.

I will try it out today.Thank you very much guacharaca for your tests, and thanks for cody for bringing the diseqc commands.

I bought that diseqc from ebay:

Code: Select all

http://cgi.ebay.com/SW81-8x1-DiSEqC-Switch-8-1-Satellite-Multi-Switch-/350368116109?cmd=ViewItem&pt=LH_DefaultDomain_0&hash=item5193912d8d

It is 8x1 diseqc 1.1 compatible.

Regards
Sami.

Hi cody, There is misunderstanding there. I was not looking to run both tuners at the same time. My problem is that I have two diseqc(s). One is 8x1 diseqc and it works brilliantly, The problem is with the other diseqc. It is 1x4 diseqc and it does not work with tbs6980. I used progdvb, dvb dream, m...

After installing bda.dev into dvb dream, now I can search all the sats on the 1st tunner but I cant scan anything on the 2nd tunner(like before only first sat is detected it seems). So, my question is that bda.dev only for diseqc support for the 1st tunner only and how I can scan the 2nd tunner if ...

After installing bda.dev into dvb dream, now I can search all the sats on the 1st tunner but I cant scan anything on the 2nd tunner(like before only first sat is detected it seems). So, my question is that bda.dev only for diseqc support for the 1st tunner only and how I can scan the 2nd tunner if t...

Sami you found the answer by yourself, but meanwhile i explained the same to you with answering the email you sent to our technical support e-mail address, but that will help Peter and other customers too. i believe it would be a good idea to prepare some 'sticky' threads in the forum with informat...

after a thorough search, I found that the solution was very easy. If you're using dvb dream like me then inside the dvb dream folder in the little cd came with the tuner is a file called bda.dev. Copy this file and then go to the installation directory(C:/dvbdream/devices and replace that file. Now ...

Hi, I have just bought tbs6980 dual pci-e card and arrived yesterday but I am unable to scan channels. I used dvb dream and only one sat I could scan. Other sats no signal. I have two diseqc(s). One is configured as diseqc 1.1 with 8 sats and the other is simple 1.0 A/B/C/D. I only get the nilesat 7...