TBSDTV Community Forum

This transmission use ACM/VCM mode, so there can be different MODCOD's in feed. 16APSK 4/5 is probably one of them, other can be 32APSK, for which signal is too low, so You have BER not 0. On which satellite this transmission is broadcasted?

Ability to receive by new TBS Recorder some additional "hidden" transponders, eg. at 13°E 11,432V and 12,539H, also some at 5°W

viewtopic.php?f=25&t=8281

Changes: added support for Physical Layer Scrambling (Root & Gold modes)

On what transponder you've done tests with GoldCode?Om 12648 from 5.0W? Yes, at 5°W, 12,648V Until now it has not been confirmed that with GoldCode can lock other transponders with TBSRecorder It seems that only one at 5.0W can be lock with GoldCode !?I am wrong? You are right because this is the o...

As far as I know at 5°W there is only one Gold transponder (12648), all other are in Root mode, so 12648 should be locked as Gold (121212), others as Root (Mediaset with code 8, RAI with 16416).

Tested new TBSRecorder

1) Fixed
2) In LNB Settings LNB High is 110600, should be: 11600 (additional "0")
3) Fixed

Thanks

@enzogara - TBS Recorder can only record TS, not stream it - wrong app.

Something went wrong - cannot donwload - message says that file had been deleted...

EDIT: Link fixed - thanks, I'll test it later.

I can confirm - working for me with Root on Hot Bird 13°E (only need to select MIS after lock, because if I won't choose MIS - signal is locking and unlocking) :D Screenshot: http://tinypic.com/r/wu3qyd/6 Bugs: 1) After closing TBSRecorder looks like PLS Code is not cleared and thus none DVB-S2 freq...

There is none at this moment - next step (after there will be SDK available to know how to turn PLS/MIS on) will be on developers side, to add support for PLS/MIS in their DVB players :D With drivers support that should be much easier now :D Now the only one app that I know that can select PLS and M...

Of course PLS is available in CrazyScan but thanks to adding this into driver in can be easier accessible by authors of DVB apps. The only way to use PLS at this moment is to do some low level magic or use StreamReader.dll from crazycat. After adding PLS control into driver any DVB app will be able ...