TBSDTV Community Forum

for me disabling C6/C7 Support in the BIOS did the trick

yes indeed, I remembere having seen inode errors on the RO filesystem of OpenElec on my custom compiled build but didn't pay too much attention as I was looking after my network problem.

well, no luck, tried several methods, uboots..... but never ever was able to access the partition table. So I think I'm gonna send it back tomorrow.

Thank you for your proposal, I will do that in the evening, although MfgTool2 already fails at trying to create the partition for uboot but it's worth a try.

no, nothing at all is connected, so just OTG and power. eMMC = USB storage/disk from the point of view of Windows

yes, I do have revision 2.3, found not much, or lets better say nothing about this revision by now. After trying to test with a original TBS build my eMMC seems to have died (don't know yet if it's just an u-boot problem or if it's really broken, have opened a thread and waiting for a reply). As Rev...

or is my device just broken?. I got V2.3 this week (4dip switches) and upgraded at first to vpeters OE build and later on to self compiled builds with pcie support. All went smoothly but my NIC was only able to connect at 100MBit/FD. So after making sure that it's not my cables, switches (tried CISC...

basically it should be just a matter of CONFIG_PCI=y CONFIG_SOC_IMX6Q=y CONFIG_PCI_IMX6=y CONFIG_PCIEPORTBUS=y CONFIG_PCIE_DW=n I did just add my Ath9K driver and some regional settings tweaking (as my card's eeprom is in world domain 0 and this is the easiest way to override this, but I don't know ...

Mini-PCIe IS WORKING

[ 6.700836] ieee80211 phy0: Atheros AR9300 Rev:3 mem=0xf0c80000, irq=155

and I have WLAN1 Interface in ifconfig, and AP-mode is working, so now I have something to play with

LSD

ok, I see, I just built with PCI_IMX6 and a bunch of other stuff enabled in my config and have to wait till I get home and have time to test it. Stay tuned

LSD