TBSDTV Community Forum

yeah I know that delaying the start would fix it, but also a network that's available faster would do the trick, which I would see as the prefered fix , but thanks anyway.

For me disabling C6/C7 support in the BIOS on an Intel Celeron J1900 MB did the trick of getting rid of discontinuity errors. The other option was to "stress" the system with e.g. stress or burnP6 on all cores so that the CPU did not enter C6/C7 states. But simply disabling it in BIOS save...

[ 2.110722] fec 2188000.ethernet eth0: registered PHC device 0 [ 6.877736] fec 2188000.ethernet eth0: Freescale FEC PHY driver [Generic PHY] (mii_bus:phy_addr=2188000.ethernet:04, irq=-1) [ 6.877985] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 27.945795] IPv6: ADDRCONF(NETDEV_CHANGE): eth0:...

Hi, got my Matrix this week and just tried this build and for me it's already working quite well. So far I wonder if anybody is also only getting a 100Mbit link as I do ([ 27.945741] libphy: 2188000.ethernet:04 - Link is Up - 100/Full). Forcing it to 1000 just disconnects the link. By now I've just ...

but now build 0057 is here and it is WORKING
but attention, you might loose support for your installed memory as I did, I had to change my modules for now

There is still no internal BETA Bios on the intranet, so don't expect anything soon

sure, the only thing is there is currently no internal beta BIOS on the Intel intranet, do you have any version info, or if you are in contact with the BIOS guys, it would be nice if they could publish it internally

ah ok, I have access to beta BIOS releases from Intel, but there was non at the time I started the thread, let's see what Intels FAE has to offer

Thanks
Bernhard

I'm already on Build 0053, dated September 05, so that is the latest BIOS available, but still the same result, there is also no sign of any PCI-E 1.0a fixes in the change log. Do you know which version should fix it?

Bernhard

Hi Has anybody TBS6984 running on an Intel DZ77GA-70K mainboard? It's not displayed on the BIOS devices screen (where I can see other PCI-E addin cards), nor is there any sign in device manager of it. The same card is detected on other mainboards, so it is basically ok. I also tried other PCI-E slot...