TBSDTV Community Forum

astra support dvb-s/s2 dvbt/t2 dvbc atsc . 1. dvb-s/s2 configuration file : dvbs.lua #!/usr/bin/env astra-4.3 log.set({ syslog = "astra0"}) pidfile("/var/run/astra0.pid") adapter_0 = dvb_tune({ type= "S", adapter = 0, tp = "10988:V:27500", lnb = "9750:106...

HI all Some of our customer want to know how to use OSCAM with TBS3102 here is detail steps include two protocol ,dvbapi or newcamd . 1.when tbs3102 is insert it will load /dev/ttyUSB0 ,OSCAM get key from /dev/ttyUSB0 via mouse protocol . Oscam has 3 configuration file : oscam.server ,oscam.user,osc...

1. oscam can descramble 16 channels at the same time by default,
#define MAX_DEMUX 16 --> #define MAX_DEMUX 64 in oscam source . ( module-dvbapi.h )

recompile oscam and reinsteall.

2. if also can't descramble ,please send the mumudvb configuration file.

hi ,

tvheadend need libssl.so libcrypto.so ,so it need to compile openssl first.

best regards !

1. autoconfig (stream all channels) 1)dvbs/s2 card=0 freq=3840 srate=27500 pol=H coderate=auto lnb_slof=5150 lnb_lof_low=5150 lnb_lof_high=5150 common_port=1234 #scam_support=1 autoconfiguration=full #the listening ip for http unicast:moi's ip ip_http=192.168.8.44 #(moi pro's ip) unicast=1 port_http...

Hi All Here is the config file of astra,this can be taken as an example. 1.config dvbs/s2 #!/usr/bin/env astra-4.3 log.set({ syslog = "astra0"}) pidfile("/var/run/astra0.pid") require("stream") adapter_0 = dvb_tune({ type= "S", adapter = 0, tp = "10988:V:...

hello ,

what card insert moi+?
you can use command "dmesg | grep frontend " to find the adapter .
you can add jack_2431 by skype. or give me the remote control with teamviewer.

best regards!

hello , if you want to lock C- Band freq , you should set high band, low band, switch band , default is lnb_lof_high=10600 lnb_lof_low=9750 lnb_slof=11700 . please try this config : card=3 #### autoconfiguration=full #### multicast_ipv4=0 multicast_ipv6=0 unicast=1 ip_http=0.0.0.0 ###### freq=3845 p...

hello,

you can download the old release of MOIpro firmware (Marvell Development Board ) from

https://my.pcloud.com/publink/show?code ... Cr6byN6z8k

best regards !

hello , 1. don't wirte command in /etc/inittab. 2. you should only write two command in a shell script and put it in /etc/init.d/ dir. example: startdvblast.sh #!/bin/sh sleep 15 dvblast -f 10988000 -s 41250000 -v 13 -a 0 -c /opt/dvblast.conf & dvblast -f 10922000 -s 41250000 -v 13 -a 1 -c /opt/...