TBSDTV Community Forum

Maybe this will help. If you have a wifi card, VLC will use the first IP in the stack. You need to prioritize the NIC where you are receiving the multicast (LAN I presume). https://forum.videolan.org/viewtopic.php?t=78872#p287162 On another note, multicast might not work properly in household router...

I also have a TBS6814 in the same setup, but that one doesn't work properly. It happens both with the TBS drivers and the Open source drivers. A lot of discontinuities and errors trying to lock the same frequency. Crazycat can you help me? In this example I'm using a Ubuntu 16.04 with latest upstrea...

I always get ahead of myself.... ISDB-T Working flawlessly ./dvblast -a 0 -n 0 -f 497000000 -r /tmp/adapter4.sock -5 ISDBT -b 6 -m qam_64 -G 16 -r /tmp/adapter1.sock DVBlast 3.1 (git-3.0-15-g12a1eb9-dirty) warning: restarting debug: compiled with DVB API version 5.10 debug: using DVB API version 5.1...

Hi, I've been testing this TBS board in linux both with TBS drivers and the open source drivers. I'm getting a lot of discontinuities and Transport errors when using the normal TBS drivers. The same RF cable works perfectly in a TV. CAM00346.jpg A x8227 Geniatech works fine under the same conditions...

Hi , I've been trying to lock ISDB-T signal but so far I'm only able to lock DVB-T. I'm using dvblast 3.1. All I get is a DVB: lock status is 00. I remember using a x8227 board from geniatech and changing nothing at all to make the ISDB work. Plain DVB-T settings would work. I suppose there's someth...

Hi,

Unfortunately I wouldn't count on all TBS drivers to work on ARM unless you use a TBS distribution. Only some TBS USB open source drivers are known to work in ARM distributions.

Check this thread: viewtopic.php?f=34&t=7563

You can use buildroot to build a vanilla kernel along with a distribution. Or you can use YOCTO.

But you won't be able to use any TBS boards except if you look for opensource drivers I think: https://bitbucket.org/CrazyCat/linux-tbs-drivers . I'm not even sure they all work on ARMv7

Hispasat 10730 H 27500 on both tuners. This is my output :? FE: TurboSight TBS 6991SE DVBS/S2 frontend (DVBS) status SCVYL | signal 74% | snr 95% | ber 67108863 | unc 0 | FE_HAS_LOCK status SCVYL | signal 74% | snr 94% | ber 67108863 | unc 0 | FE_HAS_LOCK status SCVYL | signal 74% | snr 95% | ber 67...

Didn't have this problem in the TBS6985.

I have two TBS devices in a Intel equipment. TBS6991SE and a TBS6905 Drivers - 151105 Test frequency Hispasat 10730 H 27500 - 6991SE is able to lock when no modulation is used in command line (dvblast legacy) - 6905 is not. I don't see any lock. I only see sync being acquired and lost, using dvblast...