TBSDTV Community Forum

Does TBS6982 (dual DVB-S/S2) have the same issues ?

I moved my TBS6985 to another PC with motherboard P5E-V and the TV card works perfect. No counter errors what I could see compared to the other board P7P55D LE. On the other hand I have one TBS 6284 (Quad T/T2) in it works perfect in both machines. My guess is that it's something with the hardware b...

What type on LNB do you have ? I have a Quad output LNB and the isolation between the different "ports" is not good enough. If you have one receiver using one port, the other ports will get some "glitches" if you change polarization/LO etc... or do you have this problem ? http://...

I have tested the buffer and IRQ trick without any improvments...

Hi, Nobody has come up with a solution yet. I've tried to resolve this with TBS support, but their conclusion was an incompatibility with my motherboard. Maybe TBS can recommend a working motherboard when using linux !? I'm using for the "non-working" TBS6985 board in the setup (Fedora 18...

I have a similar setup for a new system (Fedora 18) TBS6985 and tested different versions if Tvh.... :cry: The errors causes drops... I have another system with TBS6925 without any problems. Will move the adapter around when I have the time to test... 2014-01-29 23:35:56.330 TS: TurboSight TBS 6985 ...

steven wrote:Sorry that TBS5880 can not enable NULL packet filter.later we will release a new generation card TBS5881 which have the
NULL packet filter.

When will TBS5881 be available ?

It seems that I have the same problem. I use one adapter (0) for SNR measurements. Every minute I collect SNR value for 5 frequencies with dvbsnoop. If I start tvheadend for the other adapters (1,2,3) the measurements will sometimes get corrupted due to the scanning. It feels like a isolation issue ...

bkipper wrote:Did somebody here asking the config files actually received them?

Nothing yet....

Will this setup use the card for SW cam (oscam) and HW cam at the same time ? Then I'm also interested...