TBSDTV Community Forum

150 view with no replay

I tried too much to configure built-in CAM module using professional cams SMITH , POWER CAM HD OSCAM work only on USB mouse and its work perfect and descramble viacess and iredto my worked config on USB TBS3102 5 Crystal Phoenix Card Reader [reader] Label = JSC Device = /dev/ttyUSB0 Protocol = mouse...

I have issue on decript using local host IP , I found in this forum you need to setup the lo ip using ifconfig

Code: Select all

ifconfig lo 127.0.0.1

every time you reboot , I'm use OSCAM installed in MOI box with Mouse Reader.

how can I upgrade through TFTP server , its possible or not , I'm try to upgrade it remotely vi network.
I put the file in TFTP server with ip 192.168.0.20 and MOI searching for file 'C0A80014.img'

when apply command tftpboot at console

I did it with FFMPEG & OSCAM for each channel using Ubuntu Server , Now in V.20 OSCAM installed by default , and now trying to install ffmpeg for MOI. but CPU or memory for MOI good for ffmpeg , I'm using core i5 2.4 GHz with 16G RAM , CPU load at 10-20% with trans coding 8 channels from MPEG in...

Just there is issue on all ver, problem its when we do a search on tunner1 there is channels on vertecal high and low and horizantal high and low we access only on channels on same group VH or VL for example need to use 2nd tunner to get the other channels we did it but by doing two search on same S...

on issue in upgrade , need to Delete files from memory card , if not , each start-up will do upgrade and reset config.

Hello after upgrade you need to select whcih service to start , TVHeadend or VDR the defulat setting its off for both , login using MOI ip for ex http://192.168.1.188 with out any port then go to MOI setting then select the main service and reboot it , like picture below MOI.PNG after that you can l...

How to config oscam to read from PCMCIA CAMs, and is there is manual for it

files in /usr/local/etc/
oscam.config
oscam.server

were is the location of OSCAM.user

Ahmed