TBSDTV Community Forum

Thank you vpeter,
i'll update soon

I'm not sure what you mean, you want to update your OpenElec to a newer version ? ... using KERNEL and SYSTEM files from this image? , what image do you mean ? The Lakka image i made can only run from sdcard to test lakka. Lakka has nothing from Openelec, only the base system, there is no XBMC in it.

Hi Hekser, i made a SDcard-Image from this LAKKA, you can boot it from sdcard if you have installed Openelec with new bootloader in your TBS2910 to test LAKKA. Otherwise you have to set the boot switches to boot from sd. https://www.dropbox.com/s/kv5b2nmze9qjrzj/lakka-sd.img?dl=0 write to a sdcard w...

I have v2.1, on my board are the 8 switches like in the pdf. So i don't know how the switch on your board works.

+1

Here you can change from where to boot, emmc, sd3, sd2, ...
more here, page 13: http://www.tbsdtv.com/download/document ... rev2.1.pdf

Thank's again for all your work !

Try
sudo apt-get update
sudo apt-get upgrade
sudo apt-get dist-upgrade
perhaps it helps to upgrade the whole system.
Anyway ,there is no hardware graphics accelleration in this ubuntu-build. This could be the problem.

1 - open terminal 2 - install nano editor = sudo apt-get install nano 3 - edit sources.list = sudo nano /etc/apt/sources.list 4 - Add this lines= deb http://ports.ubuntu.com/ubuntu-ports trusty main restricted universe multiverse deb-src http://ports.ubuntu.com/ubuntu-ports trusty main restricted un...

You're right, in the new Openelec build it seems to work fine. It was a issue in the gotham build from 14.09.2014. I booted this build from sdcard to test.

So in the new build it's working o.k.