TBSDTV Community Forum

Hi cody, A thought occurred last night - could the behaviour I'm seeing be a result of not enough power being supplied to the LNB via the card over the satellite cable? Do I need to connect up some of the additional power connectors available on the card to my PSU? Or am I completely off track with ...

Hi cody, Doing as you suggested gives: mediacentre scan-s2 # ./scan-s2 -a2 test_scan-s2.conf API major 5, minor 1 scanning test_scan-s2.conf using '/dev/dvb/adapter2/frontend0' and '/dev/dvb/adapter2/demux0' initial transponder DVB-S 10773000 H 22000000 5/6 35 QPSK ----------------------------------...

Hi cody, Thanks for the response. I've adjusted the configuration file as suggested in the README: S1 11720000 H 29500000 3/4 35 QPSK S1 11740000 V 27500000 2/3 35 QPSK S1 11758000 H 27500000 2/3 35 QPSK S1 11778000 V 27500000 2/3 35 QPSK S1 11798000 H 29500000 3/4 35 QPSK S1 11817000 V 27500000 2/3...

Hi, thanks for the response. Do you mean the -r switch for scan-s2? e.g. ./scan-s2 ... -r 28.2E On my system there's a list of settings for Astra 28.2E in /usr/share/dvb/dvb-s/Astra-28.2E: # Astra 28.2E SDT info service transponder # freq pol sr fec ## Astra 2A # Transponder 1 S 11720000 H 29500000 ...

Hi, I've successfully installed the drivers (Gentoo 2.6.35-r15). After reading some of the other posts on this forum I've successfully got szap-s2 tuning: mediacentre szap-s2 # ./szap-s2 -a 2 -H -c ../bbc1london.conf -S 0 "BBC 1 London;BSkyB" reading channels from file '../bbc1london.conf'...