TBSDTV Community Forum

@crazycat,
very good work!
All product names are correct and complete!

Thanks,
Paul

@crazycat, I've tested the new driver version and I get the following results in the linux console after put in: dmesg | grep "registering adapter" cx88-mpeg driver manager 0000:05:01.2: DVB: registering adapter 0 frontend 0 (TBS 8922 DVB-S/S2)... cx23885 0000:02:00.0: DVB: registering ada...

Some weeks ago I found some issues with the new open source driver and I don't know if anyone works on it? ⋅  My older cards TBS-6981 and TBS-8922 get not the right names in syslog, dmesg ... I described these at this point http://www.tbsdtv.com/forum/viewtopic.php?f=86&t=9960&star...

Ok, what about if you have a bunch of 6205 cards? I do need to dedicate one for DVB-T and leave the rest for DVB-C. ... With the new open source driver you can receive with each card DVB-T and DVB-C. For example if you have 2 cards, you can connect card-1 with the cable socket to receive DVB-C and ...

... maybe its possible to modify the hardware to use the rf out as rf in, and have 2xdvb-c +2xdvb-t. I think you can do that, if you open the metal case and separate the wiring in the 4-way splitter! But this doesn't really work, because how will you made tuner 1+2 only work for DVB-C and tuner 3+4...

... I used an needed the new open sorce driver with my new TBS-6205 to receive DVB-C and DVB-T2 with on driver at the samt time! ... ... Can you explain how you can get dvb-c and dvb-t, on tbs6205 at same time? ... Sorry, this was a little bit misunderstanding! :? You can't use DVB-C and DVB-T at t...

I need lirc_serial because I use an IR receiver on serial com 1. ... Look at my answer in this thread from Friday Jan 13. (you will find them at Page 8). I use also a remote control with an ir-receiver at COM1 for many vears with "lirc_serial" at my HTPC. With one of the last update of th...

but look like this some raw register value, not dB or %. I use yaVDR with the vdr-plugin-femon to display STR and SNR. With the new driver I get a value = 0% for SNR with my TBS-6981 card. I don't know what's wrong, but with my other used cards TBS-8922 and TBS-6205 I get both values: STR and SNR A...

I found an new bug in the new open source driver:
I get no value for SNR with my TBS-6981, only a value for STR.
My other cards (TBS-8922 and TBS-6205) have a value for STR and SNR.

With the old linux-tbs-driver a have for all cards a value for STR and SNR.

Paul

I found a small cosmetic issue in the new open source driver, when I check my registered frontends. In addition to my new TBS-6205 for DVB-T2 I used one TBS-8922 and one TBS-6981 for DVB-S2. All 3 DVB cards work fine, but if I look at linux console wich frontends are available I get not the right de...