TBSDTV Community Forum

Success. I read your explanation and did a little more reading on the internet. I realized that this must be a situation of human error. Before in the DVBDream diseqc set-up menu, I had tried to set the diseqc switch up only using the four port switch menu. It worked only rarely so I then tried to w...

Now successfully receiving NBC HD s2 signals on AMC1 (103W). I discovered that one can even tweak the APID for those broadcasts that send their audio on four separate sound channels.

Thanks. I will buy that one. There is a very small chance that the code written for an 8X1 is better than the code written for a 4X1. I just did an experiment with my 1X4 diseqc switches that did not work with this card. My old infusion can send either 1.0 or 1.1 commands. All my switches only respo...

Hi Sami

I have also had problems with several low end 1X4 diseqc switches. They are not labelled as 1.0 or 1.1. I have had only limited success. I also use DVBdream. What brand is your 1X8 that works brilliantly so I can purchase the same?

I have implemented your advice with some limited success. I installed the BDA.dev which was on the disk. It brought the version of BDA.dev forward from 2.10 to 2.40. I additionally changed my device driver from 2.0.0.1 to 1.0.0.15. to see if the diseqc. situation would improve. By doing this I did g...

Something tells me that English is not your 1st language. Please be more clear with your questions. Which software are you using to run your card? Which satellites you are trying to receive.

Actually it was just a comment about the difficulty of getting the Diseqc to function. I just wanted to share that S2 signals come easily for those who have the correct dish. But yes, any advise on how to get a Diseqc switch to function with my TBS6980 and DVBDream would greatly be appreciated. For ...

I was not sure if I could get any S2 signals because of all the compatibility problems being that the card is new and I only have ku signals. In North America there are not many S2 signals on ku. However I decided to connect the stationary four foot dish instead of the motorized three foot dish to s...

I do not have 2.0.0.1 but I found a link for the following: DRIVER 2.0.0.0 http://www.xpmediacentre.com.au/community/downloads.php?do=file&id=251 Did test this on DVBProg and it was able to run two tuners at the same time. With DVBdream, I have not yet seen a way to run two tuners. One has to ma...

Here is the link for the 2.0.0.0 beta driver
http://www.xpmediacentre.com.au/communi ... ile&id=251