TBSDTV Community Forum

or is my device just broken?. I got V2.3 this week (4dip switches) and upgraded at first to vpeters OE build and later on to self compiled builds with pcie support. All went smoothly but my NIC was only able to connect at 100MBit/FD. So after making sure that it's not my cables, switches (tried CISC...

basically it should be just a matter of CONFIG_PCI=y CONFIG_SOC_IMX6Q=y CONFIG_PCI_IMX6=y CONFIG_PCIEPORTBUS=y CONFIG_PCIE_DW=n I did just add my Ath9K driver and some regional settings tweaking (as my card's eeprom is in world domain 0 and this is the easiest way to override this, but I don't know ...

Mini-PCIe IS WORKING

[ 6.700836] ieee80211 phy0: Atheros AR9300 Rev:3 mem=0xf0c80000, irq=155

and I have WLAN1 Interface in ifconfig, and AP-mode is working, so now I have something to play with

LSD

ok, I see, I just built with PCI_IMX6 and a bunch of other stuff enabled in my config and have to wait till I get home and have time to test it. Stay tuned

LSD

yeah I know that delaying the start would fix it, but also a network that's available faster would do the trick, which I would see as the prefered fix , but thanks anyway.

For me disabling C6/C7 support in the BIOS on an Intel Celeron J1900 MB did the trick of getting rid of discontinuity errors. The other option was to "stress" the system with e.g. stress or burnP6 on all cores so that the CPU did not enter C6/C7 states. But simply disabling it in BIOS save...

[ 2.110722] fec 2188000.ethernet eth0: registered PHC device 0 [ 6.877736] fec 2188000.ethernet eth0: Freescale FEC PHY driver [Generic PHY] (mii_bus:phy_addr=2188000.ethernet:04, irq=-1) [ 6.877985] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 27.945795] IPv6: ADDRCONF(NETDEV_CHANGE): eth0:...

Hi, got my Matrix this week and just tried this build and for me it's already working quite well. So far I wonder if anybody is also only getting a 100Mbit link as I do ([ 27.945741] libphy: 2188000.ethernet:04 - Link is Up - 100/Full). Forcing it to 1000 just disconnects the link. By now I've just ...

but now build 0057 is here and it is WORKING
but attention, you might loose support for your installed memory as I did, I had to change my modules for now

There is still no internal BETA Bios on the intranet, so don't expect anything soon