TBSDTV Community Forum

Hi please check your signal cable if connect to the RF "IN", if your signal strength is too strong<-1dBm~-20dBm>, please try connect to "OUT". and the signal cable do not connect any signal amplifier or spliter. the cards has sufficient signal sensitivity(-1dBm~-70dBm) for dvbt2 ...

Hi
please try this version: https://www.tbsiptv.com/download/tbs6290/tbs6290_dvbtt2_v1002_win10.zip

Best regards

Hi
Is it four adapters to start recording at the same time?

Hi
TBS6590 use different demodulation chip with 6922. and TBS6590's chip do not support the Blindscan. so it can not do a auick blind scan like 6922.


Best Regards

Hi
what is the cards you used? is it TBS6281? the card have not support the interface. you need use our new series of cards. such as TBS6281se.

Thanks
Best Regards

Hi
please download the latest drivers form github.
this is the step for install the dirvers
https://github.com/tbsdtv/linux_media/wiki

Best Regards

Hi
Here is the download link:
https://www.tbsiptv.com/download/tbs5881/TBS5881_dvbt2-dvbc_driver_win10_v1.0.0.2.zip

Best Regards

Hi
sorry for that. we will replce the new one for you.

Best Regards

Hi
Where is the drivers download from?
if you download from the github. file on the "media" , not the 'media_build'.
if you download form our web. this is a offline version, file on the "media_build/linux/drivers"

Best Regards

HI
Please check you LNB info. if it is the Ku-Linear （low band: 9750 MHz switch :11700MHz high:10600），when the 22k turn on that mean it is the High band, the frequencies is higher than 11700(the switch values). conversely , 22k turn off, the frequencies lower than 11700.

Best Regards