TBSDTV Community Forum

..well, imho in most cases it's not ACM because it simply doesn't make sense. It's mainly used for vsat but for sure not for feeding a terrestrial DVB-T network. The coding mode doesn't read ACM but ACM/ VCM ;) Sorry, don't understand. If they are not ACM/VCM (this is the way this modulation almost...

..then please explain why on 37W, 12514V the output mux is constant (tsreader) but according to the modulation parameters it's not though it says single input. I can't tell what's exactly happening on this given transmission. What's for sure is that acm/vcm modulation does exactly that, dynamically...

That's normal, on acm/vcm modulation transmission parameters change all the time. You may be interested in this (by CrazyCat)

http://rickcaylor.websitetoolbox.com/post?id=5427372

I believe the following video will also help you,

http://www.youtube.com/watch?v=we6y-aTebxQ

Set your earth position (not really necessary, unless you use a motor with USAL commands), select your device (TBS 6925), type of LNB (Ku Linear for a typical Ku band setup), your diseqc 1.0/1.1 switch setup (if any) and/or your diseqc motor 1.2/ USALS setup. On satellite info you choose the satelli...

What is exactly the problem you have with CrazyScan? After you set the basic setup for the satellite you want to scan, you press the "Scan" button. Some seconds later CrazyScan presents you a spectrum graph with some peaks that represent the signal of the transponders of the satellite. If ...

On most of the screen shots I see a lot of stream errors (e.g. 117 continuity errors in 35s on astra 11362H). Is there a problem because it should be 0 errors especially on dth satellites! Almost always they occur when the application (TSReader) starts. It counts a number of continuity errors in th...

I can't see any advanced settings either here. I only had to type the transponder main parameters (frequency, sr) in the box (since I do not have an updated transponders list in the TSReader), and it just locked to it. There was no need to set any DVB-S/DVB-S2 parameters for this one (11362,H,22000 ...

In windows 7 64bit it works fine,

Try to uninstall TBSViewer and install it again. I had the same problem with it in the beginning. Reinstalling it resolved this problem. Btw, DVBDream 1.5f (full version) works great here with 6925 in Windows 7 64bit.