TBSDTV Community Forum

steven I wrote to You about SAT>IP by email. Simulation of rtsp protocol, used by Sat>IP devices, isn't a problem. Device can working with other tools simultanously. That's mean, if frontend is busy by other applcation, device send message about busy, etc. But: Sat>IP working with principe one user ...

grenflier Wrote:

Nothing done file not exist.

Reupload:
viewtopic.php?f=98&t=8451

krasserg Wrote:Yes, i have FW 1.0 installed, but i cannot upgrade to 1.2.
I trye from 8GB and 256mB card FAT32
MOI mounts the SD and see files on it.

Ok, Stay tuned. I'll informing You about upgrade process as soon as possible.

Problem with downloads 1.opkg manager http://www.tbsdtv.com/forum/viewtopic.php?f=95&t=8485 Information The selected attachment does not exist anymore. The file ./../files/28001_e6b099a327ceee7627d9a1af47d424e8 does not exist. 2. Firmware V1.1 http://www.tbsdtv.com/download/document/tbs2900/MOI...

1 setup ip on lo interface ifconfig lo inet 127.0.0.1 netmask 255.0.0.0 Ok, As I wrote, You can't setup multicast, cause lo isn't supported true MULTICAST. (Is possible to setup BROADCAST support in Loopback). I wrote about LO setting in oscam faq: http://www.tbsdtv.com/forum/viewtopic.php?f=105&am...

For Loopback You can't setting Multicast. There's chipset and demux buffer limitation. Will be impossible, put 2 full TPs with 40mbit to dvr as sure. But, send more info about TPs and delivery system (DVB-S, DVB-S2). I think, to the future, hardware pid limitation (disable/enable budget mode), some ...

rezo Wrote:./install-opkg.sh

My mistake, corrected.

Mechanik Wrote:ok i build the new kernel with some options
what the next step? How to install new kernel to moi?

Rename it to MOI2900_k.bin and place to root of the micro SD card (delete other MOI bin files, if You have).

Control update over RS232 terminal.

Look at readme of firmware update procedure.

Hello to all I have problem with MOI overloading I want to stream with Getstream or Dvblast 15 services from 2 transponders When I start separate only 1 transponder, all is ok , CPU load is 19-32% But, in case, when I start both , CPU load is 100%. Every process load CPU with 45-60% Any ideas how I...

How setup driver options like this: # DVB Core options dvb_frontend dvb_shutdown_timeout=1 options dvb_frontend dvb_powerdown_on_sleep=0 at my tbs6984/tbs6985 we use in /etc/motprobe.d/ but this? Drivers are included into kernel (built-in). You can change default options in sources of dvbcore secti...