First off, thanks for creating a DVB device that is supported under Linux - it's what made the choice for me when decing what to buy!
I've got as far as I can with the device, in that the drivers are compiled and running, scan-s2 can pull channel information, szap-s2 can switch to a channel and gnutv is able can to dump video to a file that's watchable in mplayer. Great!
However, the final hurdle seems to be integrating the device into MythTV. I realise this may be a little OT, but there seems to be some subtle interplay between the device and MythTV I'm missing (I've been running MythTV on analogue, DVB-T and DVB-S for years, so I should know my way around it). Has anyone got this particular device working in Myth?
FWIW, I'm pointing to Astra 28.2E, 2D in the UK.
Thanks,
Richard
- Code: Select All Code
ankh@hpnas:~$ lsusb
Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 002: ID 734c:5928
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
ankh@hpnas:~$ uname -a
Linux hpnas 2.6.32-37-server #81-Ubuntu SMP Fri Dec 2 20:49:12 UTC 2011 x86_64 GNU/Linux
ankh@hpnas:~$ dmesg
[ 9.560705] dvb-usb: found a 'TBS QBOXS2 DVBS2 USB2.0' in cold state, will try to load a firmware
[ 9.560712] usb 1-5: firmware: requesting dvb-usb-tbsqbox-id5928.fw
[ 9.571112] dvb-usb: downloading firmware from file 'dvb-usb-tbsqbox-id5928.fw'
[ 9.571119] usb 1-5: firmware: requesting dvb-usb-tbsqbox-id5928.fw
[ 9.573717] tbsqboxs2: start downloading TBSQBOX firmware
[ 9.587184] IR RC5(x) protocol handler initialized
[ 9.598058] IR RC6 protocol handler initialized
[ 9.612094] IR JVC protocol handler initialized
[ 9.616784] IR Sony protocol handler initialized
[ 9.626755] [drm] Initialized drm 1.1.0 20060810
[ 9.634347] IR MCE Keyboard/mouse protocol handler initialized
[ 9.650495] lirc_dev: IR Remote Control driver registered, major 251
[ 9.720082] dvb-usb: found a 'TBS QBOXS2 DVBS2 USB2.0' in warm state.
[ 9.720198] dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer.
[ 9.720888] DVB: registering new adapter (TBS QBOXS2 DVBS2 USB2.0)
[ 10.103511] QBOXS2: CX24116 attached.
[ 10.103765] DVB: registering adapter 0 frontend 0 (Conexant CX24116/CX24118)...
[ 10.105307] input: IR-receiver inside an USB DVB receiver as /devices/pci0000:00/0000:00:12.2/usb1/1-5/input/input3
[ 10.105363] dvb-usb: schedule remote query interval to 150 msecs.
[ 10.105368] dvb-usb: TBS QBOXS2 DVBS2 USB2.0 successfully initialized and connected.
[ 10.105391] usbcore: registered new interface driver tbsqboxs2
[ 10.208043] alloc irq_desc for 26 on node 0
[ 10.208048] alloc kstat_irqs on node 0
[ 19.113004] tbsqboxs2: tbsqboxs2_set_voltage 1
[11384.356404] tbsqboxs2: tbsqboxs2_set_voltage 0
[11390.963296] tbsqboxs2: tbsqboxs2_set_voltage 1
[11399.742032] tbsqboxs2: tbsqboxs2_set_voltage 0
[11404.243141] tbsqboxs2: tbsqboxs2_set_voltage 1
[11421.698713] tbsqboxs2: tbsqboxs2_set_voltage 0
[11447.621982] tbsqboxs2: tbsqboxs2_set_voltage 2
[11569.172051] tbsqboxs2: tbsqboxs2_set_voltage 1