Moderator Control Panel ]

TBS 6908 Help

TBS 6908 Help

Postby savskii » Mon Mar 23, 2015 10:40 pm

Hi there, sorry if this has been covered before as i cant find a solution.

I have a TBS 6908 using linux Ubuntu all drivers etc are ok and i can lock normal frequencies but on 5w or 13E when it comes to these tps i below i get a 90% signal lock but i cant tune any channels:

5W
12648.00 V DVB-S2 PLS: Gold+121212 8PSK ACM/VCM Stream 1 29500 8/9

I have tryed mumudvb, scan, scan-s2, astra, dvblast and all do the same

Any help would be appriciated

Thanks
savskii
 
Posts: 13
Joined: Mon Jul 08, 2013 1:52 am

Re: TBS 6908 Help

Postby smile » Wed Mar 25, 2015 11:35 am

Hi savskii ,
There is a multistream in this frequency.maybe need input the stream number.There is necessary on the windows system.so I think maybe at the same on linux .

Best Wishes
smile
 
Posts: 164
Joined: Sun Oct 09, 2011 9:51 am

Re: TBS 6908 Help

Postby savskii » Thu Mar 26, 2015 8:05 pm

smile Wrote:Hi savskii ,
There is a multistream in this frequency.maybe need input the stream number.There is necessary on the windows system.so I think maybe at the same on linux .

Best Wishes


Hi Smile thanks for your reply...

Enter multistream how? and where?

cheers
savskii
 
Posts: 13
Joined: Mon Jul 08, 2013 1:52 am

Re: TBS 6908 Help

Postby crazycat » Fri Mar 27, 2015 12:31 am

Current linux drivers not support mis/pls control.
crazycat
 
Posts: 526
Joined: Mon Jan 31, 2011 2:46 am
Location: Ukraine, Kharkov


Return to Linux

Who is online

Users browsing this forum: No registered users and 3 guests