Hi All,
I recently purchased a TBS6892 card along with an FTA dish and LNB.
I managed to install the drivers and lock to a signal. For some reason I can’t see Galaxy 19 but to get things going I’m ok with SES-1 101W for now.
My problem is that mplayer is not playing the video/audio on interface /dev/dvb/adapter0/dvr0
root@nemo:/opt/TBS6982/szap-s2# uname -a
Linux nemo 3.11.0-15-generic #25~precise1-Ubuntu SMP Thu Jan 30 17:39:31 UTC 2014 x86_64 x86_64 x86_64 GNU/Linux
root@nemo:/opt/TBS6982/szap-s2#
Config file: james_szap-s2.conf
PEN3:11820:hC34M2O35S0:S101.0W:20000:410:400:0:0:3:2:101:0
PEN4:11820:hC34M2O35S0:S101.0W:20000:210:202:0:0:1:2:101:0
root@nemo:/opt/TBS6982/szap-s2# ./szap-s2 -c ./james_szap-s2.conf PEN3
reading channels from file './james_szap-s2.conf'
zapping to 12 'PEN3':
delivery DVB-S, modulation QPSK
sat 0, frequency 11820 MHz H, symbolrate 20000000, coderate 3/4, rolloff 0.35
vpid 0x019a, apid 0x0190, sid 0x0000
using '/dev/dvb/adapter0/frontend0' and '/dev/dvb/adapter0/demux0'
status 1f | signal 7426 | snr d709 | ber 03ffffaa | unc 00000000 | FE_HAS_LOCK
status 1f | signal c42b | snr 5c28 | ber 00000877 | unc 00000000 | FE_HAS_LOCK
status 1f | signal c3eb | snr 5c28 | ber 000005ef | unc 00000000 | FE_HAS_LOCK
status 1f | signal c3cb | snr 58be | ber 00000787 | unc 00000000 | FE_HAS_LOCK
status 1f | signal c3eb | snr 58be | ber 0000098c | unc 00000000 | FE_HAS_LOCK
status 1f | signal c3db | snr 5555 | ber 000009e7 | unc 00000000 | FE_HAS_LOCK
status 1f | signal c3ab | snr 58be | ber 00000be0 | unc 00000000 | FE_HAS_LOCK
status 1f | signal c3bb | snr 53a0 | ber 0000098a | unc 00000000 | FE_HAS_LOCK
status 1f | signal c3db | snr 53a0 | ber 00001045 | unc 00000000 | FE_HAS_LOCK
mplayer is not playing the stream while running szap-s2:
root@nemo:/home/jamesnagy/git/blindscan-s2# mplayer /dev/dvb/adapter0/dvr0
MPlayer svn r34540 (Ubuntu), built with gcc-4.6 (C) 2000-2012 MPlayer Team
mplayer: could not connect to socket
mplayer: No such file or directory
Failed to open LIRC support. You will not be able to use your remote control.
Playing /dev/dvb/adapter0/dvr0.
MPlayer interrupted by signal 2 in module: demux_open
MPlayer interrupted by signal 2 in module: demux_open
root@nemo:/home/jamesnagy/git/blindscan-s2# dd if=/dev/dvb/adapter0/dvr0 of=video.bin
^C0+0 records in
0+0 records out
0 bytes (0 B) copied, 5.60753 s, 0.0 kB/s
root@nemo:/home/jamesnagy/git/blindscan-s2#
looks like dvr0 is empty.
What could be the problem?
How can I troubleshoot this?
thanks,
James