Moderator Control Panel ]

2x 6982 fe has no lock. status:_____

2x 6982 fe has no lock. status:_____

Postby bokerom » Tue Nov 17, 2015 4:26 am

Hello,

I have 2 6982 in ubuntu server 14.04, I trying to launch for 1 week but no work for me.

I am using astra cesbo (https://cesbo.com/en/astra/) but when i try to scan DVBS1 can not find channels. But if is DVBS2 find signal and channel. Under DVBdream work correct in windows. But not in ubuntu.

The signal and cable is correct.

dmesg | grep frontend
[ 5.954376] DVB: registering adapter 0 frontend 0 (TurboSight TBS 6982SE DVBS/S2 frontend)...
[ 6.507805] DVB: registering adapter 1 frontend 0 (TurboSight TBS 6982SE DVBS/S2 frontend)...
[ 7.080263] DVB: registering adapter 2 frontend 0 (TurboSight TBS 6982SE DVBS/S2 frontend)...
[ 7.632706] DVB: registering adapter 3 frontend 0 (TurboSight TBS 6982SE DVBS/S2 frontend)...

after try scan..show this message;

WARNING: [dvb_input 0:0] fe has no lock. status:_____
WARNING: [dvb_input 1:0] fe has no lock. status:_____
WARNING: [dvb_input 2:0] fe has no lock. status:_____
WARNING: [dvb_input 3:0] fe has no lock. status:_____

In the configuration I tested all the combinations:

Fec: auto...x/x...
Roll-off: Default:35
Modulation: QPSK... AUTO

With always same result...

Same problem with scan-s2 / transponder DVB-S NO services but transponder DVB-S2 find "services"

Any one can help me, please?

A lot of thankyou in advance

Regars.
bokerom
 
Posts: 2
Joined: Mon Nov 16, 2015 7:03 am

Re: 2x 6982 fe has no lock. status:_____

Postby suayb » Wed Nov 18, 2015 12:18 am

I confirm that.

*i'm using Debian Unstable
*i purchased my card one week ago
Last edited by suayb on Wed Nov 18, 2015 10:45 pm, edited 1 time in total.
suayb
 
Posts: 2
Joined: Wed Nov 11, 2015 2:38 am

Re: 2x 6982 fe has no lock. status:_____

Postby bokerom » Wed Nov 18, 2015 5:17 am

Any solution?, or maybe we need to get RMA for the products.

Regards.
bokerom
 
Posts: 2
Joined: Mon Nov 16, 2015 7:03 am

Re: 2x 6982 fe has no lock. status:_____

Postby suayb » Wed Nov 18, 2015 7:51 am

Unfotunately i haven't found any solution.
suayb
 
Posts: 2
Joined: Wed Nov 11, 2015 2:38 am

Re: 2x 6982 fe has no lock. status:_____

Postby WalstonTempest » Thu Nov 19, 2015 4:17 am

Is your firmware getting loaded ok? Plus sometimes having two cards causes issues.
WalstonTempest
 
Posts: 5
Joined: Mon Aug 31, 2015 1:02 am

Re: 2x 6982 fe has no lock. status:_____

Postby WalstonTempest » Thu Nov 19, 2015 4:32 am

Although this link is not specific to your cards I think will help point you in the right direction, see the trouble shooting section.
http://linuxtv.org/wiki/index.php/TBS6280
WalstonTempest
 
Posts: 5
Joined: Mon Aug 31, 2015 1:02 am

Re: 2x 6982 fe has no lock. status:_____

Postby WalstonTempest » Thu Nov 19, 2015 10:52 pm

And in doing some scouting I came accross this https://freetoairamerica.wordpress.com/ ... your-irqs/
WalstonTempest
 
Posts: 5
Joined: Mon Aug 31, 2015 1:02 am


Return to Linux

Who is online

Users browsing this forum: No registered users and 1 guest

cron