Hello,
I have 2 6982 in ubuntu server 14.04, I trying to launch for 1 week but no work for me.
I am using astra cesbo (https://cesbo.com/en/astra/) but when i try to scan DVBS1 can not find channels. But if is DVBS2 find signal and channel. Under DVBdream work correct in windows. But not in ubuntu.
The signal and cable is correct.
dmesg | grep frontend
[ 5.954376] DVB: registering adapter 0 frontend 0 (TurboSight TBS 6982SE DVBS/S2 frontend)...
[ 6.507805] DVB: registering adapter 1 frontend 0 (TurboSight TBS 6982SE DVBS/S2 frontend)...
[ 7.080263] DVB: registering adapter 2 frontend 0 (TurboSight TBS 6982SE DVBS/S2 frontend)...
[ 7.632706] DVB: registering adapter 3 frontend 0 (TurboSight TBS 6982SE DVBS/S2 frontend)...
after try scan..show this message;
WARNING: [dvb_input 0:0] fe has no lock. status:_____
WARNING: [dvb_input 1:0] fe has no lock. status:_____
WARNING: [dvb_input 2:0] fe has no lock. status:_____
WARNING: [dvb_input 3:0] fe has no lock. status:_____
In the configuration I tested all the combinations:
Fec: auto...x/x...
Roll-off: Default:35
Modulation: QPSK... AUTO
With always same result...
Same problem with scan-s2 / transponder DVB-S NO services but transponder DVB-S2 find "services"
Any one can help me, please?
A lot of thankyou in advance
Regars.