Ok, I think it supports T2. I manage to lock on another mux, much more distant also transmitting in T2 mode
. All my other cards and sticks don't have any issue to use the closest one at 570 MHz but this card seems to have some problems. I will check tomorrow in more detail. I have checked before to add an attenuator (if there is an overload issue) but need to investigate more. Thanks anyway for your help and support. BTW found this informative page.
http://blog.palosaari.fi/2014/09/linux- ... blems.htmlmuy@server1:~$ ./dvbv5-scan -a 4 dvb-t2
Cannot calc frequency shift. Either bandwidth/symbol-rate is unavailable (yet).
Scanning frequency #1 594000000
ERROR command STREAM_ID (42) not found during store
Lock (0x1f) Signal= 45.98% C/N= 57.97% UCB= 37990 postBER= 0
Service SVT1 HD Väst, provider Sveriges Television: reserved
Service SVT2 HD Väst, provider Sveriges Television: reserved
Service TV3 HD BORÃS, provider Viasat AB: reserved
Service Kanal 5 HD, provider SBS Broadcasting Networks Ltd: reserved
Service Humax BXR-HD ver 1.00.05, provider Humax BXR-HD: data broadcast
Service Sagemcom RT90-160 HD Boxer, provider Sagem: data broadcast
Service Sagemcom DTIW77, provider Boxer TV Access AB: data broadcast
Service TV4 HD Borås, provider TV4 AB: reserved