Moderator Control Panel ]

LibreELEC (Krypton) v7.90.008

LibreELEC (Krypton) v7.90.008

Postby vpeter » Sat Nov 05, 2016 5:57 pm

LibreELEC (Krypton) v7.90.008: http://vpeter.libreelec.tv/imx6-solidru ... r-3.14.tar

Tested with Matrix v1.2 and v2.1. Both working fine (at least for me).
@buddyrm: can you try this version?
You can help me buy new work notebook with paypal donation, after 8 years it's time to upgrade.
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=FLVT7ACMYAPS6
vpeter
 
Posts: 427
Joined: Sun Jul 27, 2014 2:12 am
Location: Slovenia

Re: LibreELEC (Krypton) v7.90.008

Postby buddyrm » Thu Nov 10, 2016 11:23 pm

Thanks for the update. I will try it in the next few days and get back to you.
buddyrm
 
Posts: 27
Joined: Thu May 05, 2016 3:22 am

Re: LibreELEC (Krypton) v7.90.008

Postby buddyrm » Fri Nov 11, 2016 9:57 pm

Vpeter, this version still does not work for video playback. But I noticed that this is version 1.3 and NOT 1.2 or 2.1. Would that be the issue? See attachement
Attachments
tbs.jpg
buddyrm
 
Posts: 27
Joined: Thu May 05, 2016 3:22 am

Re: LibreELEC (Krypton) v7.90.008

Postby vpeter » Fri Nov 11, 2016 10:00 pm

I see no reason why v1.3 would not work if older and newer revision works. It would be nice to get some manufacturer support but this would probably be too much :lol:

Maybe your hw is just broken? ;)
You can help me buy new work notebook with paypal donation, after 8 years it's time to upgrade.
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=FLVT7ACMYAPS6
vpeter
 
Posts: 427
Joined: Sun Jul 27, 2014 2:12 am
Location: Slovenia

Re: LibreELEC (Krypton) v7.90.008

Postby buddyrm » Fri Nov 11, 2016 10:13 pm

I can not see how it is broken. the old install works and I have been using it for over a year. It's just when playing video, the unit start playing but I only get the play bar on the bottom and a few seconds later it crashes. Definitely a video driver issue with the V1.3. :-(
buddyrm
 
Posts: 27
Joined: Thu May 05, 2016 3:22 am

Re: LibreELEC (Krypton) v7.90.008

Postby buddyrm » Fri Nov 11, 2016 10:14 pm

I would like to play around in the OS with video drivers but I need to know where to find them or at least know how to update the KODI version to see if it is there the problem. Can you send me some quick instructions. I would love to help out.
buddyrm
 
Posts: 27
Joined: Thu May 05, 2016 3:22 am

Re: LibreELEC (Krypton) v7.90.008

Postby vpeter » Fri Nov 11, 2016 10:17 pm

libreelec compile

Code: Select all
PROJECT=imx6 LINUX_VERSION=sr-3.14 SYSTEM=matrix make image
You can help me buy new work notebook with paypal donation, after 8 years it's time to upgrade.
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=FLVT7ACMYAPS6
vpeter
 
Posts: 427
Joined: Sun Jul 27, 2014 2:12 am
Location: Slovenia

Re: LibreELEC (Krypton) v7.90.008

Postby buddyrm » Fri Nov 11, 2016 10:33 pm

Thank I will follow it up. Just a quick note. This version 1.3 has the video GPU Vivante GC2000. What does the 1.2 and 2.1 have?
buddyrm
 
Posts: 27
Joined: Thu May 05, 2016 3:22 am

Re: LibreELEC (Krypton) v7.90.008

Postby buddyrm » Fri Nov 11, 2016 10:36 pm

Is it possible to build the version with SSH and SAMBA enabled? At least I can then access openelec. The OPenelec configuration addon is not working in the release you made. Previous version I was able to get it enabled through the first boot after install. Not this version.
buddyrm
 
Posts: 27
Joined: Thu May 05, 2016 3:22 am

Re: LibreELEC (Krypton) v7.90.008

Postby vpeter » Fri Nov 11, 2016 10:38 pm

buddyrm wrote:Just a quick note. This version 1.3 has the video GPU Vivante GC2000. What does the 1.2 and 2.1 have?
I would assume both have GC2000 because they are based on i.MX6 Dual/Quad. Just like Udoo system and solidrun's cuboxi on which this image works fine.
Only i.MX6 Solo/Dual Lite has GC880. And I doubt tbs would use first one type of soc, then another and later switched back.
You can help me buy new work notebook with paypal donation, after 8 years it's time to upgrade.
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=FLVT7ACMYAPS6
vpeter
 
Posts: 427
Joined: Sun Jul 27, 2014 2:12 am
Location: Slovenia

Next

Return to Announcements

Who is online

Users browsing this forum: No registered users and 1 guest