Moderator Control Panel ]

LibreELEC (Krypton) v7.90.008

Re: LibreELEC (Krypton) v7.90.008

Postby vpeter » Sun Nov 20, 2016 11:52 pm

[quote="nanasi"][quote="buddyrm"]
Maybe it is the Version 1.3 Looks like it is waiting for some hardware readiness that never finished. :-(

I suppose that a uninitialized cpu-fuse is the cause for the phenomenon.
I remember the non-unique MAC-address trouble.

Probably not because I have such version without mac address. That's why in this case it is set to 1E:ED:19:27:1A:B2 in u-boot.
You can help me buy new work notebook with paypal donation, after 8 years it's time to upgrade.
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=FLVT7ACMYAPS6
vpeter
 
Posts: 427
Joined: Sun Jul 27, 2014 2:12 am
Location: Slovenia

Re: LibreELEC (Krypton) v7.90.008

Postby nanasi » Tue Nov 22, 2016 4:28 am

To check the fuse value, the following uboot command can be used.
If bit1 of fuse value is zero, the security config is not initialized.
Just in case.

TBS-MatrixTV-V1.0.1.1/Profiles/MX6Q\ Linux\ Update/OS\ Firmware/files/u-boot-matrix.imx
U-Boot 2013.04 (Oct 28 2014 - 18:06:53):
[code]
U-boot> imxotp read 4
Fuse at (index: 0x4) value: 0x2
[/code]

OpenELEC-imx6.arm-6.0.0-matrix/3rdparty/bootloader/u-boot-matrix.imx
U-Boot 2015.10-rc5 (Nov 02 2015 - 19:15:41 +0100):
[code]
Matrix U-Boot> fuse read 0 4
Reading bank 0:

Word 0x00000004: 00000002
[/code]
nanasi
 
Posts: 3
Joined: Sun Jan 31, 2016 5:44 am

Re: LibreELEC (Krypton) v7.90.008

Postby fdt38 » Sun Dec 25, 2016 12:58 am

[quote="vpeter"]fdt38, try [url=http://vpeter.libreelec.tv/imx6-solidrun-kernel-3.14/tmp/LibreELEC-imx6.arm-7.90.008-matrix-sr-3.14-TBS5220.tar]this[/url] version.


Thanks for the link, but I missed your post so I didn't try the file (and now the link fails with Err. 404).
If you can post it again ... (sorry !)
fdt38
 
Posts: 2
Joined: Thu Oct 06, 2016 9:19 pm
Top

Re: LibreELEC (Krypton) v7.90.008

Postby Cjcr » Fri Dec 30, 2016 11:55 pm

Hi vpeter,

Are you going to publish LibreElec with the latest version for Matrix? It is very welcome if you do :-D

P.S: Happy new year!
Cjcr
 
Posts: 75
Joined: Sun Apr 18, 2010 10:22 pm

Re: LibreELEC (Krypton) v7.90.008

Postby vpeter » Sat Dec 31, 2016 12:09 am

[quote="Cjcr"]Are you going to publish LibreElec with the latest version for Matrix? It is very welcome if you do :-D
P.S: Happy new year!
Will do - I just skipped 009 and 010 because there were not much changes.
You can help me buy new work notebook with paypal donation, after 8 years it's time to upgrade.
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=FLVT7ACMYAPS6
vpeter
 
Posts: 427
Joined: Sun Jul 27, 2014 2:12 am
Location: Slovenia
Top

Re: LibreELEC (Krypton) v7.90.008

Postby Cjcr » Sat Dec 31, 2016 12:23 am

[quote="vpeter"][quote="Cjcr"]Are you going to publish LibreElec with the latest version for Matrix? It is very welcome if you do :-D
P.S: Happy new year!
Will do - I just skipped 009 and 010 because there were not much changes.

Oh thank you! ;)
Cjcr
 
Posts: 75
Joined: Sun Apr 18, 2010 10:22 pm
Top

Re: LibreELEC (Krypton) v7.90.008

Postby Ahrlad » Mon Jan 02, 2017 11:16 pm

So, my Matrix box boots about one time in five - the rest of the time it ends up with no signal to monitor and no network. I tried to read serial output and it seems it hits some kernel error when it doesn't boot - when it does boot, I can't see any errors in dmesg. I've tried reinstalling LibreElec and trying older and newer versions, with the same results.

I imagine there's some eMMC errors involved. Is there some easy way of making a LibreElec SD card, and some guide on how to get the box to boot from SD?
Ahrlad
 
Posts: 12
Joined: Fri Jun 20, 2014 10:08 pm

Re: LibreELEC (Krypton) v7.90.008

Postby Cjcr » Sun Jan 08, 2017 4:29 am

Anyone else is having problems setting up manual IP? it go always to DHCP after restart. There's no way to make it working with fixed IP. It worked fine in OpenElec 6.
Cjcr
 
Posts: 75
Joined: Sun Apr 18, 2010 10:22 pm

Previous

Return to Announcements

Who is online

Users browsing this forum: No registered users and 1 guest