Page 1 of 2

LibreELEC (Krypton) v8.0.2 MR

PostPosted: Wed Jun 07, 2017 1:19 am
by vpeter
LibreELEC (Krypton) v8.0.2 MR with Kodi v17.3

Currently can't test it but should work fine.

Re: LibreELEC (Krypton) v8.0.2 MR

PostPosted: Thu Jun 08, 2017 11:55 am
by eraguate
Thank you once again!

Will test it over the weekend and will let everyone know if I find any issues!

Re: LibreELEC (Krypton) v8.0.2 MR

PostPosted: Sun Jun 18, 2017 3:05 am
by franky384
You're the best and the only one, it seems, who makes the matrix box usable for me ! Had it thown in the cellar for about a year, now it's back and alive thru your neverending work :!:

Re: LibreELEC (Krypton) v8.0.2 MR

PostPosted: Sat Jul 01, 2017 10:03 am
by eraguate
vpeter Wrote:LibreELEC (Krypton) v8.0.2 MR with Kodi v17.3

Currently can't test it but should work fine.


Hi guys,

No luck for me with the last two LibreELEC builds unfortunately. I am using a V2.1 board and despite being able to load the build with the MFGTool I only get a blank screen when trying to boot.

I am reverting to the ancient Android 4.2 build just to verify that the box is still working. It does!

It looks like I am finally ditching the MatrixPC for the RaspberryPI which is easier to update with OSMC...

If anyone knows a way to load a full Linux Distro (debian, arm, etc) on the Matrix please let me know. I would like to give this box a last purpose as a headless Torrent client or FTP server before considering throwing it away.

Thks!

Re: LibreELEC (Krypton) v8.0.2 MR

PostPosted: Sat Jul 01, 2017 1:34 pm
by vpeter
eraguate Wrote:No luck for me with the last two LibreELEC builds unfortunately. I am using a V2.1 board and despite being able to load the build with the MFGTool I only get a blank screen when trying to boot.
I also have v2.1.

Can you enable ssh and enable serial console in uEnv.txt file before flashing and after boot check what you get on serial log? And try to connect with ssh (it should work).

Regarding full distro: there are multiple distros available for different devices. It is just a matter of adapting bootloader and device tree. There are recipes how to roll your own image. Not that hard.

Re: LibreELEC (Krypton) v8.0.2 MR

PostPosted: Tue Jul 04, 2017 4:40 pm
by franky384
I also have a 2.1, i had no problem to install with the mfg tool.
I used the MfgTool2-reinstall.bat.
Try it again

Re: LibreELEC (Krypton) v8.0.2 MR

PostPosted: Sun Oct 01, 2017 11:19 pm
by laruf
Hello all,

I've installed this latest release and facing an issue when using my IR remote control. When I press once any button of the remote control, my device take it like I've press twice the same button. I use tu use Openelec, and it works fine. I only face this issue when using Libreelec (any version).

Any idea to help me solve this ?

Regards

Laruf
Matrix v2.1

Re: LibreELEC (Krypton) v8.0.2 MR

PostPosted: Thu Oct 12, 2017 2:28 pm
by laruf
Hello,

Following my last question on the issue, I can see that using CEC remote control mode it works fine.

It seems the issue can be resolved updating /etc/lirc/lircd.conf.xbox file : Need to uncomment this lign "# suppress_repeat 4"

But this file can't be updated. How can it be possible to update this file ?

Thanks in advance for your help

Laruf
Matrix v2.1

Re: LibreELEC (Krypton) v8.0.2 MR

PostPosted: Sun Oct 15, 2017 4:36 pm
by franky384
You have to stop lirc before you edit any lirc config files.
log in via ssh and kill lirc with:
killall lircd
now you can edit the config files, then reboot.
your lircd.conf should be in /storage/.config/lircd.conf

Re: LibreELEC (Krypton) v8.0.2 MR

PostPosted: Wed Oct 18, 2017 7:51 pm
by laruf
Hello all

And thanks Franky384 for your help
My problem is solved !

For those who could face the same issue :
copy /etc/lirc/lircd.conf.rpi file to /storage/.config/lircd.conf
And that's it