TBSDTV Community Forum

Cjcr Wrote:I bet that is a w_scan or szap problem ... I have the same problem here with 1.0.0.3 but it works well if preload the channels.conf file from a backup and run it with VDR+XBMC

This problem present in 1.0.0.2 and 1.0.0.3 version.

Tuning Failed problem solved!

If DISEqC configure in MatrixTV configuretion menu then
/etc/vdr/diseqc.conf file not change with correct data.

If diseqc.xonf file edited manually, then scan is correct.

bzoli72

matchboxx Wrote:

bzoli72 Wrote:I create in /root//usr/share/transponders folder S1.0W.ini file from S0.8W.ini file.

tested, work, thanks

Hi matchboxx!

If disturb S1.0W Thor, edit /etc/vdr/sources.conf file.
Modify S1.0W line to S0.8W and create /root/usr/share/transponders folder a S0.8W.ini file.

bzoli72

bzoli72 Wrote:Tuning Failed problem solved!

If DISEqC configure in MatrixTV configuretion menu then
/etc/vdr/diseqc.conf file not change with correct data.

If diseqc.xonf file edited manually, then scan is correct.

bzoli72

Hi bzoli72

Oh,Great,Can you give us more detail information with this problem?
Such as what's your DiSEqc config, and what's the right diseqc.conf file?

So we can update in the next version.

Thanks

Kind Regards

steven

Hi bzoli72

Oh,Great,Can you give us more detail information with this problem?
Such as what's your DiSEqc config, and what's the right diseqc.conf file?

So we can update in the next version.

Thanks

Kind Regards

steven

Hi steven!

I find how to configure VDR diseqc.conf file in VDR Wiki home page.
http://www.vdr-wiki.de/wiki/index.php/Diseqc.conf

I Use direct LNB to 0.8W Thor

bzoli72

bzoli72 Wrote:

Hi bzoli72

Oh,Great,Can you give us more detail information with this problem?
Such as what's your DiSEqc config, and what's the right diseqc.conf file?

So we can update in the next version.

Thanks

Kind Regards

steven

Hi steven!

I find how to configure VDR diseqc.conf file in VDR Wiki home page.
http://www.vdr-wiki.de/wiki/index.php/Diseqc.conf

I Use direct LNB to 0.8W Thor

bzoli72

Hi bzoli72

Thanks for the information
Can you give us more detail information,such as our wrong diseqc.conf,
and the right one should be?
This will be very useful for us.

Thanks

Kind Regards

steven

Hi bzoli72

Thanks for the information
Can you give us more detail information,such as our wrong diseqc.conf,
and the right one should be?
This will be very useful for us.

Thanks

Kind Regards

steven

Hi steven!

If configure DiSEqC with MatrixTV configuration menu then
/etc/vdr/diseqc.conf file write only a comment line.
1:
#codeline#/S1.0W:9750/10600/VH%0_1:%|

My modified diseqc.conf data:
1:
S1.0W 11700 V 9750 t v W15
S1.0W 99999 V 10600 t v W15
S1.0W 11700 H 9750 t V W15
S1.0W 99999 H 10600 t V W15


Fix Ku 9750/10600 LNB on Thor. (1.0W)

Is the 1.0.0.3 still available? I cannot find it.

Regards

Peter

2.Add TBS USB tuner support for the following products:
TBS 5990 Dual DVB-S/S2 CI BOX

TBS6991