vpeter Wrote:So I prepared few files which makes MatrixTV multiboot capable. Two files are replaced (ucl2.xml, u-boot-mx6q-sabresd.bin) and two files are extra (u-boot-matrix.imx, uEnv.txt). Files from archive TBS-MatrixTV-V1.0.1.0-multiboot.zip must be copied and overwrite to folder "OS Firmware" in original MatrixTV files from TBS-MatrixTV-V1.0.1.0.zip.
When this is flashed to eMMC new multiboot u-boot is already there and also uEnv.txt file. MatrixTV boots as before. But now we can also boot anything from SD card. Like OpenELEC
Then only SD card for OpenELEC must be made.
TBS-MatrixTV-V1.0.1.0-multiboot.zip: http://l.bitcasa.com/FCHADODk
mikebzh44, can you blacklist internal gpio IR receiver and reboot? Maybe then you will get IR working.
Also try mode2 program. And you still need to use first autostart.sh I posted.
- Code: Select All Code
echo "blacklist gpio_ir_recv" >>/storage/.config/modprobe.d/blacklist.conf
Wo, It is great, thanks so much for the effort you made to our matrix.
Kind Regards
steven