TBSDTV Community Forum

New OpenELEC Matrix version:
OpenELEC-iMX6.arm-devel-20141017185658-r19393-g4556014-Helix.tar: http://l.bitcasa.com/OEJP21Cy
OpenELEC-iMX6.arm-devel-20141018132309-r19393-g4556014-Gotham-ui_fix.tar: http://l.bitcasa.com/KT3b4KFi

obsolete
OpenELEC-iMX6.arm-devel-20141017191026-r19393-g4556014-Gotham.tar: http://l.bitcasa.com/QUAnjHh8

Changes:
latest Kodi-Helix
XBMC-Gotham is the same version as before
device tree file renamed from imx6q-sabresd.dtb to imx6q-tbs2910.dtb
same MfgTool2 .bat file for different hw matrix versions
uEnv.txt file is the same for different hw matrix versions
MAC address set in uEnv.txt only if there is no address set by u-boot

vpeter wrote:New OpenELEC Matrix version:
OpenELEC-iMX6.arm-devel-20141017185658-r19393-g4556014-Helix.tar: http://l.bitcasa.com/OEJP21Cy
OpenELEC-iMX6.arm-devel-20141017191026-r19393-g4556014-Gotham.tar: http://l.bitcasa.com/QUAnjHh8

Changes:
latest Kodi-Helix
XBMC-Gotham is the same version as before
device tree file renamed from imx6q-sabresd.dtb to imx6q-tbs2910.dtb
same MfgTool2 .bat file for different hw matrix versions
uEnv.txt file is the same for different hw matrix versions
MAC address set in uEnv.txt only if there is no address set by u-boot

Peter, what about ir receiver support? Also there is no analog sound option in xbmc config.
I mean, if they are missing for everyone, not just me, I'd be delighted to work on adding these features.

IR receiver is working on Matrix v1.2 with external DIY receiver connected on GPIO pins. Also working on Matrix v2.1 with build-in IR receiver.
But maybe there is a problem with receiver protocol. I set rc-rc6-mce:
https://github.com/OpenELEC/OpenELEC.tv ... e.patch#L7

Code: Select all

OpenELEC:~ # cat /sys/class/rc/rc0/uevent
NAME=rc-rc6-mce
DRV_NAME=gpio-rc-recv


and my MCE remote works as expected.

Also according to TBS MAtrix info page

Remote Support: HDMI-CEC, MCE

MCE is fine. Don't know what is the cause of non-working IR. Maybe someone else can check/confirm?

Analog output is also working thanks to @milan which add sgtl5000 audio codec in device tree.

WiFi is also working. But it is slow.

So everything is working. Good job

vpeter wrote:IR receiver is working on Matrix v1.2 with external DIY receiver connected on GPIO pins. Also working on Matrix v2.1 with build-in IR receiver.
But maybe there is a problem with receiver protocol. I set rc-rc6-mce:
https://github.com/OpenELEC/OpenELEC.tv ... e.patch#L7

Code: Select all

OpenELEC:~ # cat /sys/class/rc/rc0/uevent
NAME=rc-rc6-mce
DRV_NAME=gpio-rc-recv


and my MCE remote works as expected.

Also according to TBS MAtrix info page

Remote Support: HDMI-CEC, MCE

MCE is fine. Don't know what is the cause of non-working IR. Maybe someone else can check/confirm?

Analog output is also working thanks to @milan which add sgtl5000 audio codec in device tree.

WiFi is also working. But it is slow.

So everything is working. Good job

I have board v1.3. I am using built-in IR receiver with TBS remote (from TBS6118 card). It's working in MatrixTV, with LIRC protocol.
I've been using your previous Gotham build.
UPDATE: current Gotham build solved the audio issue for me, thanks.

antonl1911 wrote:I have board v1.3. I am using built-in IR receiver with TBS remote (from TBS6118 card). It's working in MatrixTV, with LIRC protocol.

I will check what it can be done to get it working.

+1 for getting inboard IR receiver

Am I the only one who have align issues in OpenELEC addon settings ? Labels are far too left so I can only see last letters.
Will send a screenshoot soon.

mikebzh44 wrote:Am I the only one who have align issues in OpenELEC addon settings ? Labels are far too left so I can only see last letters.

Helix is fine but Gotham has some issues. Already investigating.

Ok, will make some tests on helix.

mikebzh44 wrote:+1 for getting inboard IR receiver

Done. Run this two commands in SSH console and reboot. I was testing with remote from TBS5980 (I think). But not all keys are working - someone should record them.

Code: Select all

cp /storage/.config/autostart.sh /storage/.config/autostart.sh_orig
curl -o /storage/.config/autostart.sh https://dl.dropboxusercontent.com/u/8224157/public/matrix/tbs_matrix_openelec_tbs_remote.autostart


vpeter wrote:

mikebzh44 wrote:Am I the only one who have align issues in OpenELEC addon settings ? Labels are far too left so I can only see last letters.

Helix is fine but Gotham has some issues. Already investigating.

Fixed. In all builds I forgot to use different settings addon for Gotham than it's used for Helix.

OpenELEC-iMX6.arm-devel-20141018132309-r19393-g4556014-Gotham-ui_fix.tar: http://l.bitcasa.com/KT3b4KFi