Moderator Control Panel ]

OpenELEC is ready for Matrix Now.Update link

Re: OpenELEC is ready for Matrix Now.

Postby vpeter » Thu Aug 14, 2014 5:50 pm

Read the instructions more carefully ;)

To burn the images
For v1.3 use the v1 reinstall.bat script , for v2.1 use reinstall v2.1.bat


Don't run exe - run bat.
You can help me buy new work notebook with paypal donation, after 8 years it's time to upgrade.
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=FLVT7ACMYAPS6
vpeter
 
Posts: 427
Joined: Sun Jul 27, 2014 2:12 am
Location: Slovenia

Re: OpenELEC is ready for Matrix Now.Update link

Postby Sillyname » Tue Aug 26, 2014 12:44 am

I run the reinstall bat for ver.1 but it doesn't install. Acts like it does but finishes too quickly and my monitor doesn't show anything. Please help...

You're endearing fan,

Sillyname
Sillyname
 
Posts: 13
Joined: Tue Jul 08, 2014 3:46 am

Re: OpenELEC is ready for Matrix Now.Update link

Postby vpeter » Tue Aug 26, 2014 1:15 am

Sillyname, not sure what is wrong. Did you set the small switch to correct position? Which Matrix hw version are you using? Which bat file did you run?
You can help me buy new work notebook with paypal donation, after 8 years it's time to upgrade.
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=FLVT7ACMYAPS6
vpeter
 
Posts: 427
Joined: Sun Jul 27, 2014 2:12 am
Location: Slovenia

Re: OpenELEC is ready for Matrix Now.Update link

Postby Sillyname » Tue Aug 26, 2014 2:25 am

vpeter wrote:Sillyname, not sure what is wrong. Did you set the small switch to correct position? Which Matrix hw version are you using? Which bat file did you run?


Switch is at BURN...hw version 1...bat file: MfgTool2-reinstall_v1...

I tried ver 2.1, for giggles but it hangs up on uboot...which is what i expected...
Sillyname
 
Posts: 13
Joined: Tue Jul 08, 2014 3:46 am

Re: OpenELEC is ready for Matrix Now.Update link

Postby vpeter » Tue Aug 26, 2014 2:40 am

In same folder where bat files are there is also file MfgTool.log. Delete this file and then run bat file for v1 again. After that put the content of this file to http://pastebin.com/ web service and send me a link in PM. Maybe I will see what is wrong from there.
You can help me buy new work notebook with paypal donation, after 8 years it's time to upgrade.
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=FLVT7ACMYAPS6
vpeter
 
Posts: 427
Joined: Sun Jul 27, 2014 2:12 am
Location: Slovenia

Re: OpenELEC is ready for Matrix Now.Update link

Postby Sillyname » Tue Aug 26, 2014 3:01 am

okee dokee!
Sillyname
 
Posts: 13
Joined: Tue Jul 08, 2014 3:46 am

Re: OpenELEC is ready for Matrix Now.Update link

Postby Sillyname » Tue Aug 26, 2014 6:20 am

Did you receive the PM?
Sillyname
 
Posts: 13
Joined: Tue Jul 08, 2014 3:46 am

Re: OpenELEC is ready for Matrix Now.Update link

Postby vpeter » Tue Aug 26, 2014 3:09 pm

Sillyname wrote:Did you receive the PM?
Yes. I compare the log with mine and it's very similar to yours. It should be ok.
Does it work if you install MatrixTV?
You can help me buy new work notebook with paypal donation, after 8 years it's time to upgrade.
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=FLVT7ACMYAPS6
vpeter
 
Posts: 427
Joined: Sun Jul 27, 2014 2:12 am
Location: Slovenia

Re: OpenELEC is ready for Matrix Now.Update link

Postby Sillyname » Tue Aug 26, 2014 5:51 pm

MatrixTV works...
Sillyname
 
Posts: 13
Joined: Tue Jul 08, 2014 3:46 am

Re: OpenELEC is ready for Matrix Now.Update link

Postby vpeter » Tue Aug 26, 2014 6:04 pm

Sillyname wrote:MatrixTV works...
Then I don't know why Openelec doesn't. If you would have serial console attached maybe you would see something from there. But without that ... it's almost impossible to tell.
You can help me buy new work notebook with paypal donation, after 8 years it's time to upgrade.
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=FLVT7ACMYAPS6
vpeter
 
Posts: 427
Joined: Sun Jul 27, 2014 2:12 am
Location: Slovenia

PreviousNext

Return to Announcements

Who is online

Users browsing this forum: No registered users and 1 guest