Moderator Control Panel ]

OpenELEC Beta 4.95.2 and more

Re: OpenELEC Beta 4.95.2 and more

Postby Dinos52 » Wed Feb 11, 2015 11:48 pm

@vpeter:
I am still comparing the performance of OE 5.0.2 on my Pi/Pi2 (Raspberry Pi) and on the Matrix. What I found is a menu point in the Pi which limits the update of the overlays during video playback (/settings/video/acceleration/limit GUI updates when playing video). The value is 10 fps for the Pi. If I have a look to the cpu usage during video playback ("O"), the value W_fps (lowest line) is indeed always <10 fps on the Pis and the video reproduction is excellent. The Matrix does not have this menu point and I can see a much more bigger value between 25 and 41 fps, depending on the video. This means that the fps of the overlay update is proportional to the fps of the video! So I would like to ask if this could be the reason for the bad performance of the Matrix on video playback. Your kind answer would be appreciated.
BTW: I have evaluated your last Gotham build from 22.12.2014 again and I'm really wondering that all reproduction issues are gone with that version.
Dinos52
 
Posts: 64
Joined: Sun Dec 07, 2014 7:57 pm
Location: Germany

Re: OpenELEC Beta 4.95.2 and more

Postby MikeDotBe » Fri Feb 20, 2015 1:09 am

vpeter,
Is this version of openelec compatible with hardware v2.3 ???

Thanks
MikeDotBe
 
Posts: 22
Joined: Tue Sep 30, 2014 10:43 pm

Re: OpenELEC Beta 4.95.2 and more

Postby vpeter » Fri Feb 20, 2015 4:06 pm

MikeDotBe Wrote:Is this version of openelec compatible with hardware v2.3
I don't know - I have only v1.3 and v2.1 revisions. Why don't you try and let us know - I would do the same if had this board :?

Why people asking me questions about hw I don't have.... like new revisions, pcie cards, sata disks, ...
You can help me buy new work notebook with paypal donation, after 8 years it's time to upgrade.
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=FLVT7ACMYAPS6
vpeter
 
Posts: 427
Joined: Sun Jul 27, 2014 2:12 am
Location: Slovenia

Re: OpenELEC Beta 4.95.2 and more

Postby MikeDotBe » Fri Feb 20, 2015 6:32 pm

I just try the 5.0.0 and... it does not work...

The only version i manage to install is
- TBS-MatrixTV-V1.0.1.1-V21

have tryed those from this thread :
- OpenELEC-imx6.arm-4.95.3
- OpenELEC-imx6.arm-4.97.1
- OpenELEC-imx6.arm-5.0.0
but none of the could be installed, they are stopped after partitionning message

and here is he message on mfgtool.log, at the end (5.0.0)
Code: Select All Code
ModuleID[2] LevelID[10]: CmdOperation[0] device chagned and reset to state 1
ModuleID[2] LevelID[10]: ExecuteCommand--Push[WndIndex:0], Body is $ echo 0 > /sys/block/mmcblk0boot0/force_ro
ModuleID[2] LevelID[10]: ExecuteCommand--Push[WndIndex:0], Body is send
ModuleID[2] LevelID[10]: ExecuteCommand--Push[WndIndex:0], Body is $ dd if=$FILE of=/dev/mmcblk0boot0 bs=1024 seek=1
ModuleID[2] LevelID[10]: ExecuteCommand--Push[WndIndex:0], Body is $ echo 1 > /sys/block/mmcblk0boot0/force_ro
ModuleID[2] LevelID[10]: ExecuteCommand--Push[WndIndex:0], Body is $ echo 8 > /sys/devices/platform/sdhci-esdhc-imx.3/mmc_host/mmc0/mmc0:0001/boot_config
ModuleID[2] LevelID[10]: ExecuteCommand--Push[WndIndex:0], Body is pipe dd of=partitition-emmc.sh
ModuleID[2] LevelID[10]: ExecuteCommand--Push[WndIndex:0], Body is frf
ModuleID[2] LevelID[10]: ExecuteCommand--Push[WndIndex:0], Body is $ sh partitition-emmc.sh /dev/mmcblk0
ModuleID[2] LevelID[1]: PortMgrDlg(0)--MSCDevice--Command Push(no file) excute failed
ModuleID[2] LevelID[10]: CmdOperation[0], current command executed failed, so SetEvent(hDevCanDeleteEvent)
ModuleID[2] LevelID[10]: CCmdOpreation[0] thread is Closed
ModuleID[2] LevelID[10]: CCmdOpreation[0] thread is Closed
ModuleID[2] LevelID[10]: DeviceManager::OnMsgDeviceEvent() - EVENT_KILL
ModuleID[2] LevelID[10]: CMyExceptionHandler::OnMsgExceptionEvent() - KillExceptionHandlerThread
ModuleID[2] LevelID[10]: Exception Handler thread is closed
ModuleID[2] LevelID[1]: delete MxHidDeviceClass
ModuleID[2] LevelID[10]: Device Manager thread is closed
MikeDotBe
 
Posts: 22
Joined: Tue Sep 30, 2014 10:43 pm

Re: OpenELEC Beta 4.95.2 and more

Postby vpeter » Fri Feb 20, 2015 7:02 pm

MikeDotBe Wrote:I just try the 5.0.0 and... it does not work...
If you have serial console attach it and post log from there.
You can help me buy new work notebook with paypal donation, after 8 years it's time to upgrade.
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=FLVT7ACMYAPS6
vpeter
 
Posts: 427
Joined: Sun Jul 27, 2014 2:12 am
Location: Slovenia

Re: OpenELEC Beta 4.95.2 and more

Postby MikeDotBe » Fri Feb 20, 2015 8:56 pm

what does it means ???
MikeDotBe
 
Posts: 22
Joined: Tue Sep 30, 2014 10:43 pm

Re: OpenELEC Beta 4.95.2 and more

Postby vpeter » Fri Feb 20, 2015 9:06 pm

MikeDotBe Wrote:what does it means
On serial console you see what is executed. Seems you don't have it so just ignore this part.

Seems MfgTool starts to write stuff to eMMC but something is wrong. From what I can get from Google try running MfgTool2-reinstall.bat as Administrator. Maybe this time will work.
You can help me buy new work notebook with paypal donation, after 8 years it's time to upgrade.
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=FLVT7ACMYAPS6
vpeter
 
Posts: 427
Joined: Sun Jul 27, 2014 2:12 am
Location: Slovenia

Re: OpenELEC Beta 4.95.2 and more

Postby MikeDotBe » Fri Feb 20, 2015 9:39 pm

run as administrar on the batch file give an error message saying "mfgtools2.exe not found"... i assume this has something to do with the "location" of the CMD.exenot in the same place as mfgtools2.exe

have tryied different solutions, like shorter path (c:/temp/openelec5), "solve problem" by setting the program mfgtool2.exe under "runas" rights, copying cmd.exe to mfgtools directory... none of thoose are working...

maybe if you explain me how to get that serial console... i'll may be of greater help
MikeDotBe
 
Posts: 22
Joined: Tue Sep 30, 2014 10:43 pm

Re: OpenELEC Beta 4.95.2 and more

Postby MikeDotBe » Fri Feb 20, 2015 10:47 pm

found this in the log
DLL version: 2.2.3
Friday, February 20, 2015 14:30:22 Start new logging
ModuleID[2] LevelID[1]: Error: Can't find the specified list(SabreSD-eMMC-use-batch-file) in the xml file
ModuleID[2] LevelID[1]: Parse ucl script failed, error code: 12

does it help?
MikeDotBe
 
Posts: 22
Joined: Tue Sep 30, 2014 10:43 pm

Re: OpenELEC Beta 4.95.2 and more

Postby vpeter » Sat Feb 21, 2015 12:00 am

MikeDotBe Wrote:does it help?
No. This just means you need to execute .bat file and not mfgtool2.exe directly.
You can help me buy new work notebook with paypal donation, after 8 years it's time to upgrade.
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=FLVT7ACMYAPS6
vpeter
 
Posts: 427
Joined: Sun Jul 27, 2014 2:12 am
Location: Slovenia

PreviousNext

Return to Announcements

Who is online

Users browsing this forum: No registered users and 5 guests

cron