Page 1 of 10

OpenELEC 5.0.4

PostPosted: Sun Mar 01, 2015 12:37 am
by vpeter
OpenELEC 5.0.8
OpenELEC 5.95.1

https://drive.google.com/folderview?id= ... aring#list

Not tested thoroughly. That's why I'm looking for users who would help supporting images for TBS Matrix.
Without some better approach there will be no official images for this system. Or at least no bug reports.

====================

OpenELEC 5.0.4

https://drive.google.com/folderview?id= ... sp=sharing

No support, no bug reports or features requests.

Re: OpenELEC 5.0.4

PostPosted: Sun Mar 01, 2015 8:26 pm
by Cjcr
vpeter wrote:OpenELEC 5.0.4

https://drive.google.com/folderview?id= ... sp=sharing

No support, no bug reports or features requests.

Everything seems working really well. Thank you for the update! I really appreciate the work you did with the updates for Matrix box. ;)

Re: OpenELEC 5.0.4

PostPosted: Mon Mar 02, 2015 10:41 pm
by MikeDotBe
is there somewhere a "what's new" between 5.0.4 and 5.0.0 ???
(haven't check their website yet)

Re: OpenELEC 5.0.4

PostPosted: Wed Mar 04, 2015 12:30 am
by bobopalo
vpeter wrote:OpenELEC 5.0.4

https://drive.google.com/folderview?id= ... sp=sharing

No support, no bug reports or features requests.


Hi vpeter, I just installed 5.0.4 image on my matrix v1.3. Installation was success, no errors but after starting of openelec after few seconds approx. 10s system freeze. Same result I observed with Openelec 5.0.0.
I don't have serial cable (serial console) and COM port on my PC. No keyboard, no mouse, no UART communication.

Is there any way how to get log file from Matrix v1.3 without serial console?

Thanks, bobopalo

Re: OpenELEC 5.0.4

PostPosted: Thu Mar 05, 2015 3:20 am
by bobopalo
log file from Startup openelec 5.0.4 (from start to freeze)

Re: OpenELEC 5.0.4

PostPosted: Thu Mar 05, 2015 3:42 am
by vpeter
bobopalo wrote:... my matrix v1.3 ... approx. 10s system freeze
I tested on v1.2 (don't have v1.3) and it is working. Can you try without HDMI cable connected and without anything on USB?

Re: OpenELEC 5.0.4

PostPosted: Thu Mar 05, 2015 5:00 am
by bobopalo
attached logs are without any devices in USB ports, no HDMI cable, no Ethernet cable. Zip file contains log file from installation and Startup of Openelec 5.0.4 on HW version 1.3

Re: OpenELEC 5.0.4

PostPosted: Thu Mar 05, 2015 3:38 pm
by vpeter
I don't know what is wrong. Can't help.

Maybe you can add parameter clocksource=jiffies to bootargs parameters uEnv.txt file before installing.

Re: OpenELEC 5.0.4

PostPosted: Fri Mar 06, 2015 3:40 am
by bobopalo
I added bootargs parameters to end of line in uEnv.txt. It's OK?

mmcargs=setenv bootargs 'boot=/dev/mmcblk0p1 disk=/dev/mmcblk0p2 progress debugging console=ttymxc0,115200 video=mxcfb0:dev=hdmi,1920x1080M@60,if=RGB24,bpp=32 dmfc=3 consoleblank=0 clocksource=jiffies'

Re: OpenELEC 5.0.4

PostPosted: Fri Mar 06, 2015 3:51 pm
by vpeter
bobopalo, I don't have any clue why your system doesn't work. Sorry.