Page 4 of 6

Re: OpenELEC 6.0.0

PostPosted: Thu Jan 21, 2016 2:27 am
by maspeter
Thanks for quick answare. I have tryed this version OpenELEC-imx6.arm-6.0.0-matrix-test1-v13.tar. The record is OK, without bug. But system does not start. On the monitor stay "no signal".

Re: OpenELEC 6.0.0

PostPosted: Thu Jan 21, 2016 2:35 am
by vpeter
I will look this once v6.0.1 will be released.

Re: OpenELEC 6.0.0

PostPosted: Fri Jan 22, 2016 9:48 am
by jimmyx
thank you vpeter for the OE 6.0.0 for the matrix :))

Re: OpenELEC 6.0.0

PostPosted: Sat Jan 23, 2016 12:43 am
by jimmyx
One thing ive noticed w/ OE on these matrix boxes every time im playing a file with DTS-HD MSTR every 5 - 15mins it will cut out drop down to DTS then kick back in at DTS-HD MSTR id love to get to the bottom of this. Please let me know what I can provide to help resolve this issue.


Also I am sending you a donation when I am back to my office later this evening (everyone else should do the same otherwise these matrix boxes would have NO SUPPORT vpeter is the man!!)

Re: OpenELEC 6.0.0

PostPosted: Mon Jan 25, 2016 1:29 am
by vpeter
https://drive.google.com/file/d/0B4FdVu ... sp=sharing

OpenELEC 6.0 with old u-boot bootloader. Maybe that's the issue. If not I will make another test image with newer kernel.

Re: OpenELEC 6.0.0

PostPosted: Mon Jan 25, 2016 7:33 am
by maspeter
Thank you for your time. Unfortunately same behavior, Openelec starts without problem but after cca 20sec it stops.

Re: OpenELEC 6.0.0

PostPosted: Tue Jan 26, 2016 2:22 am
by vpeter
https://drive.google.com/file/d/0B4FdVu ... sp=sharing

I think this is master build with Jarvis but newer kernel 3.14.54.

Re: OpenELEC 6.0.0

PostPosted: Tue Jan 26, 2016 6:30 am
by maspeter
Unfortunately same behavior (20sec and stop). Maybe I have a problem with the hardware, but strange is that version
"OpenELEC-TBS.arm-devel-20140807170606-r18774-g2c40356" works without problem. Can not be a problem with this Mfgtool2?
In this version from 2014 are files for two variants: v1 and v21. Thank you.

Re: OpenELEC 6.0.0

PostPosted: Tue Jan 26, 2016 5:16 pm
by vpeter
No, I don't think there is Mfgtool issue or u-boot. Because system starts.
Do you have serial console by any chance?

Re: OpenELEC 6.0.0

PostPosted: Tue Jan 26, 2016 7:45 pm
by maspeter
I do not have RS232. I checked the trase from babboy (page 2). He has same problem with V1.3. It seems te be a problem:
[ 40.079296] BUG: soft lockup - CPU#3 stuck for 23s! [kworker/3:1:92]
Can It be something like this?
The soft lockup messages are not kernel panics, and generally appears when the virtual machine is using a large amount of its resources.
To stop the error messages from appearing as frequently:
Some kernels allow you to adjust the soft lockup threshold by running the command:
echo time > /proc/sys/kernel/softlockup_thresh
Where time is the number of seconds after which a soft lockup is reported. The default is generally 10 seconds